EN - 63. FUNCTIONAL OVERVIEW3.1. Front Panel* The unit can also be turned on by pressing this button.1. Disc tray2. (OPEN/CLOSE) button*3. (POWER-ON) button4. Power-On indicator• Flashes while unit is starting up.• Dims and flickers when IR remote signal is received.5. Infrared sensor window6. USB InputC Caution• Do not connect any device other than USB Memory Stick or USB card reader into the USB Input. (e.g. PC, externalHDD, MP3 player, digital camera, keyboard, mouse, etc.)• When connecting a USB Memory Stick, connect it directly to the USB Input. Do not use a USB extension cable.D Note• Due to new ENERGY STAR® requirements, this unit will automatically turn on the screen saver after 5 minutes ofinactivity and enter standby mode after 25 minutes of inactivity.3.2. Rear Panel1. AC power cord2. LAN terminal3. VIDEO OUT jack4. AUDIO OUT jacks5. HDMI OUT jackC Caution• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to theunit.• This unit does not have a TV RF modulator.1 3 42* 5 6VIDEO OUT AUDIO OUTLRHDMI OUTLAN1 3 42 5