76SetupBattery Installation1. On the back of the remote,push down on the tab andlift the cover off.2. Match the batteries to the+ and - marks inside thebattery case, then insert 2AAA Alkaline batteries.3. Press the battery coverback into place.Battery SaverYour remote automatically turns off if the buttons aredepressed more than 30 seconds. This will save yourbatteries should your remote get stuck in a place wherethe buttons remain depressed (e.g., between the sofacushions).Code SaverYou will have up to 10 minutes to change the batteriesin your remote without losing codes you haveprogrammed. However, do not press any buttons untilbatteries are installed in the remote. If buttons arepressed without batteries in the remote, all codes will belost.Power-On DefaultThe remote powers on in TV mode.Code SetupThe CODE SEARCH button is used to setup theremote. You can either setup the remote using the codefor your brand of product, from the code tables (onseparate sheet), or you can search through the libraryof codes until you find a code that works for yourproduct.Please refer to “Programming with Code Search” on page8 for more information on using the code search featureto learn how to search through the library of codes foryour products.NOTE: You can store any kind of code under any mode(except TV). I.E. you can store a VCR code under theCBL button, or a DVD code under the VCR button, etc.However, you can only store TV codes under the TVbutton.Button Functions, cont.DVD FunctionsSCAN+ and SCAN- buttons control the speed of FastForward and Reverse Playback respectively.CHAPTER+ and CHAPTER- buttons respectivelylocate the succeeding or preceding Chapters or Trackson a disc.SUBTITLE button turns the subtitles on or off.REPEAT button performs DVD players “A-B Repeat” (orRPT A.B) function for repeat play of current Chapter orTrack.INFO/SELECT button brings up DVD Display orControl Menu for Chapter/Track/Title number, Timeremaining/elapsed indication, system information, etc.QUIT button is used to Exit or Clear on-screen Menudisplays.PLAY button is used to start Disc playback and forMenu selection on some DVD players.STOP button stops Disc playback.PAUSE button pauses Disc playback - press PLAY toresume.INPUT button activates the DVD Players SETUP Menu.MENU IN/OUTThe Menu In/Out button allows you to toggle in and outof Menu Mode. Pressing Menu In/Out brings up yourdevice Menu. While in Menu mode the remote’s redindicator light blinks continuously. The remote will exitMenu Mode after 20 seconds if no keys are pressed.While Menu Mode is active, the Menu, Channel,Volume, Mute and Mode keys perform the followingfunctions:MENU IN/OUT Exits/Enters Menu mode.CHANNEL UP/DOWN Up/Down commands for on-screen Menu navigation.VOLUME UP/DOWN Right/Left commands for on-screen Menu navigation.MUTE OK command for on-screen Menu selection.TV Mode Key Quit, Exit or Clear command to quit on-screen Menu and return the remote to normal operation(red indicator is now off). Note this action is alsoavailable by pressing any Mode key.MRU1301-OM_H14104.pmd 9/6/2006, 3:56 PM6-7