Magnavox MRU3500 - Universal Remote Control Owner's Manual

Also see for MRU3500 - Universal Remote Control: Specifications Specifications

Contents

Magnavox MRU3500 - Universal Remote Control Owner's Manual Manual pdf 6 page image

1312Any Mode chosen for Volume/Mute control MUST haveits own Volume/Mute function or the Volume/Mutebuttons will do nothing.Setting ALL Volume/Mute Control to any one ModeThis routine can set all Modes to “punch-through” toany one chosen Mode for Volume/Mute button controlwithout the needing to change to that Mode.1. Press and hold the SETUP button until the redindicator turns on, then release the button.2. Press and hold the MUTE button until the redindicator blinks off, then release the button.3. Press and release the desired Mode button (TV,VCR, etc.) for Volume/Mute control, the redindicator blinks then stays on.4. Press and release the MUTE button and the redindicator turns off. The red indicator will blinkrapidly for three seconds if the Mode you haveselected has no Volume/Mute control.5. All other Modes will now punch-through to yourchosen Mode for Volume/Mute control.6. All “Visual” and “Audio” programmed Modes willnow punch-through to the respective Modes youhave chosen for Volume/Mute control.Setting any Mode to use its own Volume/Mute ControlThis routine can set any Mode to use only its ownVolume/Mute control. Note - If your chosen Mode hasno Volume/Mute functions of its own then the Volume/Mute buttons will do nothing.1. Press and hold the SETUP button until the redindicator turns on, then release the button.2. Press and hold the MUTE button until the redindicator blinks off, then release the button.3. Press and release the desired Mode button (TV,VCR, etc.), the red indicator blinks then stays on.4. Press and release the VOLUME- (Down) button, thered indicator blinks then stays on.5. Press and release the MUTE button and the redindicator turns off.6. All “Visual” and “Audio” programmed Modes willnow punch-through to the respective Modes youhave chosen for Volume/Mute control.Setup, cont.Controlling Devices Requiring Separate Power On andOff Buttons, cont.To turn the TV off, press and release the POWERbutton to transmit the Power Off button command. Thismethod can be applied similarly to any device and isavailable for all Modes. Note this feature is notsupported by all codes.VCR/DVD/DVR Punch-Through FeatureThis remote allows the 6 VCR transport buttons (i.e.PLAY, PAUSE, STOP, FF, REWIND, and REC) toPunch-Through control from any Mode programmedwith TV, SAT or Cable codes to the last VCR, DVD orDVR programmed Mode you used. Normally othertypes of remotes only punch-through (from anotherMode) on the 6 VCR buttons to the device programmedunder the VCR Mode button. This is not much use ifyou are using a DVD programmed under a Mode otherthan VCR. For example, if you have 2 DVD, VCR or DVRdevices programmed into this remote, the last one youaccessed on the remote will be the one that has controlof the 6 VCR transport buttons when in any otherMode. This feature will not operate if the programmedTV, SAT or Cable code has its own VCR transportbutton control e.g. a TV Combo, SAT/PVR, etc.Volume/Mute Control and Punch-Through FeatureThis remote lets you select which device Mode controlsyour Volume/Mute buttons. The remote is initially set(factory default) for all device Modes programmed with“Visual” codes (e.g. TV, VCR, DVD, DVR, SAT &CABLE) and “Audio” codes (e.g. CD & AUDIO) to usetheir own Volume/Mute control if present. If theprogrammed “Visual” code has no Volume/Muteoperation of its own then those buttons will punch-through control to the TV Mode device withoutneeding to change to TV Mode. Please refer to the nextpage for more information.Setup, cont.MRU3500-OM_H14102.pmd 9/6/2006, 4:08 PM12-13