Magnavox MS3252S Quick Use And Setup Manual
Also see for MS3252S: Owner's manualBrochureOwner's manualQuick use and setup guide
TABLE OF C ONTENTSGetting StartedWarning/Important Notice . . . . . . . . . . . . .1Basic Cable Television Connection . . . . . . . . . . . . . .1Basic Antenna Television Connection . . . . . . . . . . . .1Basic VCR/Accessory Device Connection . . . . . . . .1Basic Television Operation . . . . . . . . . . . . . . . . . . . .2Basic Remote Control Operation . . . . . . . . . . . . . . .2Setting your TV for the first time . . . . . . . . . . . . .3-4Using the On-screen menu . . . . . . . . . . . . . . . . . . . .3Using the Language Control . . . . . . . . . . . . . . . . . . .3Setting the Tuner Mode Control . . . . . . . . . . . . . . . .3How to Automatically Program Channels . . . . . . . . .4How to Add and Delete Channels . . . . . . . . . . . . . . .4Quick Use and Setup Guide12 1234567891011BASIC TELEVISION CONNECTIONSQuick-Use and Setup GuideIMPORTANTNOTE: This owner's manual is used with severaldifferent television models. Not all features (anddrawings) discussed in this manual will necessar-ily match those found with your television set.This is normal and does not require you contact-ing your dealer or requesting service.WARNING: TO PREVENT FIRE OR SHOCKHAZARD DO NOT EXPOSE THIS UNIT TORAIN OR EXCESSIVE MOISTURE.3121 233 4456175 INOUT75 VIDEOLAUDIOROUT INS-VIDEO21Your Cable TV input intoyour home may be a sin-gle (75 ohm) cable, or aConverter Box installation.In either case the connec-tion to the TV is very easy.Just put the threaded end ofthe cable signal to the TV'santenna plug and screw itdown finger tight.CABLE TVCABLE TV/C ONVERTER75 75 VIDEOLAUDIOROUT INS-VIDEO75 75 VIDEOLAUDIOROUT INS-VIDEOOROUT TO TVIN FROM ANT.21T he basic Antenna, orCable TV, to VCR to TVconnection is shown to theright. For more informationon other hookups (possiblewhen Cable Converter orDescrambler boxes areincluded), refer to yourVCR or Cable ConverterOwner's Manuals fordetails.TV TO VCRBASIC CONNECTIONBack of TVRound Cable75Ω OhmCableConverterBoxCable TV CompanySet the TV for thetype signal you'vejust connected. (See“Tuner Mode” onpage 3 of this SetupGuide.)To select only thechannel numbers onyour Cable system,see “Auto Program"(page 4). If you use aCable ConverterBox, set the TV tothe same channel asthe Converter's CH3/4 switch.HELPFUL HINTCable TVSignalCoaxial Cable75Ω300 to 75ΩOhm AdapterCable TV signalBack of TVORNOTE: The connecting cable forthe Converter Box may be sup-plied by the Cable TV Company.VCR75 75 VIDEOLAUDIOROUT INS-VIDEO1 2Acombination antennareceives normal broad-cast channels (VHF 2-13and UHF 14-69). Your con-nection is easy since thereis only one 75Ω (ohm)antenna plug on the back ofyour TV - and that’s wherethe antenna goes.ANTENNACOMBINATION UHF/VHFSet the TV for thetype signal you'veconnected. See“Tuner Mode” onpage 3 of this SetupGuide.To set the TV toselect only the chan-nel numbers in yourarea, see “AutoProgram” on page 4.300 to 75ΩAdapterCombination VHF/UHFAntenna(Outdoor or Indoor)Twin LeadWireRound Cable75ΩBack of TVORNote: For homes with separate UHF and VHFantennas you will need an optional combinerto connect to the TV.75 VIDEOLAUDIOROUT INS-VIDEO75 VIDEOLAUDIOROUT INS-VIDEOU/VCombiner75-300 Ohm AdapterBack of TVColorTelevisionColorTelevision1 If your Cable TV signal is asingle round cable (75 ohm)then you're ready to connectto the TV.If you have a CableConverter Box: Connect theCable TV signal to the CableSignal IN(put) plug on theConverter.2 Connect the Cable TV cablesignal to the 75Ω plug on theTV.If you have a ConverterBox: Connect the OUT(put)plug from the Converter to the75Ω plug on the TV.HELPFUL HINT1 If your antenna has around end (75 ohm), thenyou're ready to connect it tothe TV.If your antenna has flattwin-lead wire (300 ohm),you first need to attach theantenna wires to the screwson a 300 to 75 ohm adapter.2 Push the round end of theadapter (or antenna) onto the75Ω plug on the rear of theTV. If the round end of theantenna wire is threaded,screw it down finger tight.1 Connect your Antenna orCable TV signal to theIN FROM ANT(enna)plug on the VCR.2 Connect the OUT TO TVplug on the VCR to the75Ω plug on the TV. Use acoaxial cable, possiblysupplied with the VCR.3 Refer to the VCROwner's Manual forother possible connectionsand operating details.OutdoorVHF/UHFAntenna |
Related manuals for Magnavox MS3252S
Magnavox MS3250C Quick Use And Setup Manual
Magnavox 27MS5402 Quick Use And Setup Manual
Magnavox MS3252S Owner's Manual
Magnavox MS3252S MS3652S Owner's Manual
Magnavox MTV-34, MTV-51, MTV-68 Use And Care Manual
Magnavox MS3250C99 Directions For Use Manual
Magnavox MS3650C Directions For Use Manual
Magnavox 20MT1336 User Manual
Magnavox 20MT4405 User Manual
Magnavox MPF68A, MTV68A Use & Care Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine