Magnavox NB500MG1F - Blu-Ray Disc Player Owner's Manual

Also see for NB500MG1F - Blu-Ray Disc Player: Specifications Specifications Owner's manual Manual Del Usuario

Magnavox NB500MG1F - Blu-Ray Disc Player Owner's Manual Manual pdf 25 page image

25ENPLAYBACKS Noise reduction (DVD-video only)Reduces the noise of the playback picture.3 Press [RETURN] to exit.You can enjoy stereophonic virtual space through yourexisting 2 channel stereo system.1 During playback, press [MODE].2 Use [K / L] to select your desired setting.3 Press [RETURN] to exit.Some BD-video have the PIP function which enables youto display the secondary video in the primary video. Youcan call up the secondary video by pressing [MODE]whenever the scene contains the secondary video.1 During playback, press [MODE] repeatedlyuntil the PIP function appears.2 Use [K / L] to select the secondary video youwant.• The secondary video will be displayed and thesecondary audio will be output.3 Press [RETURN] or [MODE] to remove the PIPinformation.Some BD-video and DVD-video contain scenes which havebeen shot simultaneously from various angles. You canchange the camera angle when appears on the TVscreen.1 During playback, press [ANGLE].• The selected angle will be displayed on the displaybar at the top of the TV screen.2 Use [K / L] to select your desired angle.“Off” : Shows the original picture as recorded.“1” : Executes 3D noise reduction which detects anddeletes the noise by comparing each pictureframes.“2” : Executes MPEG noise reduction which reducesthe block noise and mosquito noise on thesubtitle on movie.“3” : Executes both MPEG noise reduction and 3Dnoise reduction.Note• The setting will remain the same even if the unit isturned to the standby mode.• For the picture output from HDMI OUT jack, “BlackLevel” is not effective.• You cannot adjust the setting during rapid playback.Virtual Surround“Off” : No surround effect“1” : Natural surround effect“2” : Stronger surround effectNote• Set the virtual surround setting to “Off” or lower thevolume if the sound is distorted.• Virtual surround does not function during rapidplayback.• For the virtual surround, audio signal will always be2-channel LPCM.OffPIP (BONUSVIEW) SettingNote• The secondary audio will not be output when thesecondary audio is set to “Off” or when “BD AudioMode” is set to “HD Audio Output”. Refer to“Switching Audio Soundtrack” on page 27 and“Setting the BD Audio Mode” on page 28.Camera AngleNote• If “Angle Icon” setting is “Off” in “Others” menu,will not appear. Refer to page 40.primaryvideosecondaryvideo1 / 3INTRODUCTION CONNECTIONS PLAYBACK F UNCTION SETUP OTHERS