Magnum Industrial MI-31550 Operating Manual
                       | |
2TOOL OVERVIEWMAGNUM INDUSTRIAL 20" HEAVY-DUTY PLANERMI-31550 / MI-31552 / MI-31553FIGURE 1: TOOL OVERVIEWMAIN COMPONENTS(A) FRAME(B) ON/OFF SWITCH(C) TABLE EXTENSION(D) DUST CHUTE(E) GRADUATED SCALE(F) FEED SPEED ADJUSTMENT(G) CUTTING DEPTH ADJUSTMENT HANDWHEEL(H) TABLE ROLLER ADJUSTMENT LEVER1ELECTRICAL REQUIREMENTSBefore connecting the machine to the power source, verify that the voltage of your power supply corresponds with the voltagespecified on the motor nameplate. A power source with greater voltage than needed can result in serious injury to the user aswell as damage to the machine. If in doubt, contact a qualified electrician before connecting to the power source. This tool is forindoor use only. Do not expose to rain or use in wet or damp locations.POWER CORD AND PLUGBecause each installation situation is unique, this machine is supplied without a power cord or plug. An appropriate powercord and plug must be installed by a qualified electrician. The machine must be connected to an electrical source using a powercord that has a grounding wire, which must also be properly connected to the grounding prong on the plug. The outlet must beproperly installed and grounded and all electrical connections must be made in accordance with all local codes and regulations. Amanual circuit breaker is also recommended.CIRCUIT CAPACITYMake sure that the wires in your circuit are capable of handling the amperage draw from your machine, as well as any othermachines that could be operating on the same circuit. If you are unsure, consult a qualified electrician. If the circuit breaker tripsor the fuse blows regularly, your machine may be operating on a circuit that is close to its amperage draw capacity.BASIC FUNCTIONSThe Magnum Industrial 20" heavy-duty planer is designed for thickness planing of solid wood only. The unit is not designed tosurface or prepare particle board, plywood, laminates, MDF, wood panelling or any other wood-based or non-wood based materials.This planer has the capacity to plane boards up to 20” wide with a maximum thickness of 8” and a minimum thickness of 3/16”. |
Related manuals for Magnum Industrial MI-31550
manualsdatabase
Your AI-powered manual search engine