Maico MI 24 Operating Instructions Manual

Also see for MI 24: Operation manual Operation manual

Contents

Maico MI 24 Operating Instructions Manual Manual pdf 41 page image

Operating Instructions MI 24, MI 24h3912 How to change the printer paperAt the right side of the housing, pull the printer cover up using its finger recess in thefront of the printer cover.Remove the printer cover.Remove the empty paper roll.Place the new paper roll in the paper compartment in such a way that the paperunrolls from the bottom side of the roll.Pull the blue lever, which is located on the right front of the printer, forward intoposition.The paper must feed from the bottom because it is only coated on one side. If it isinserted wrong, no printout will be visible!Gently insert the paper end in between the rubber roll and the black plastic part atthe rear of the printer.Feed the printer paper until it appears from the upper part of the rubber roll.Feed about 4 – 5 inches of paper from the roll.Push the blue lever back into its backward position.Guide the paper end through the paper slot of the printer cover.Close the printer cover by putting the two guide rails at the end of the printer coverinto their appropriate slots in the paper compartment of the housing of the MI 24.Press the front of the printer cover down until it fastens.You are now ready to print.