Maico MI 34 Operating Instructions Manual

Also see for MI 34: Operation manual

Contents

Maico MI 34 Operating Instructions Manual Manual pdf 52 page image

Operating Instructions MI 34 / MI 34 HGEBAmi34e.11a.docx 51 850 232/14 08/1115 How to change the printer paperOpen the printer at the right side of the housing by pulling up the printercover Èusing its finger mould in front.Remove the printer cover È.Remove the empty paper roll.Place the new paper roll in the paper compartment in such a way that thepaper ascends from the lower part of the paper roll.Pull the blue lever, which is located on the right front of the printer, into itsforward position.The paper must roll from the bottom because it is coated on one side only.If it is inserted wrongly, no printout is visible!Gently insert the paper end between the rubber roll and the black plasticpart at the rear of the printer.Transport the printer paper until it appears from the upper part of therubber roll. Pull then the paper end app. 10 to 15 cm.Push the blue lever into its backward position.Guide the paper end through the paper slot É of the printer cover È.Close the printer cover Èby putting the two guide rails at the end of theprinter cover Èinto the appropriate slot of the paper compartment of thehousing of MI 34. Press the front of the printer cover È down until itfastens.The instrument is now ready to print.