3Power tool use and care16. Do not force the power tool. Use the correctpower tool for your application. The correct powertool will do the job better and safer at the rate forwhich it was designed.17. Do not use the power tool if the switch does notturn it on and off. Any power tool that cannot becontrolled with the switch is dangerous and must berepaired.18. Disconnect the plug from the power source and/or the battery pack from the power tool beforemaking any adjustments, changing accessories,or storing power tools. Such preventive safetymeasures reduce the risk of starting the power toolaccidentally.19. Store idle power tools out of the reach of chil-dren and do not allow persons unfamiliar withthe power tool or these instructions to operatethe power tool. Power tools are dangerous in thehands of untrained users.20. Maintain power tools. Check for misalignment orbinding of moving parts, breakage of parts andany other condition that may affect the powertools operation. If damaged, have the power toolrepaired before use. Many accidents are caused bypoorly maintained power tools.21. Keep cutting tools sharp and clean. Properlymaintained cutting tools with sharp cutting edgesare less likely to bind and are easier to control.22. Use the power tool, accessories and tool bitsetc. in accordance with these instructions and inthe manner intended for the particular type ofpower tool, taking into account the working con-ditions and the work to be performed. Use of thepower tool for operations different from thoseintended could result in a hazardous situation.Service23. Have your power tool serviced by a qualifiedrepair person using only identical replacementparts. This will ensure that the safety of the powertool is maintained.24. Follow instruction for lubricating and changingaccessories.25. Keep handles dry, clean and free from oil andgrease.GEB018-1SPECIFIC SAFETY RULESDO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto router safety rules. If you use this tool unsafely orincorrectly, you can suffer serious personal injury.1. Hold power tools by insulated gripping surfaceswhen performing an operation where the cut-ting tool may contact hidden wiring or its owncord. Contact with a “live” wire will make exposedmetal parts of the tool “live” and shock the operator.2. Use clamps or another practical way to secureand support the workpiece to a stable platform.Holding the work by hand or against your bodyleaves it unstable and may lead to loss of control.3. Wear hearing protection during extended periodof operation.4. Handle the bits very carefully.5. Check the bit carefully for cracks or damagebefore operation. Replace cracked or damagedbit immediately.6. Avoid cutting nails. Inspect for and remove allnails from the workpiece before operation.7. Hold the tool firmly with both hands.8. Keep hands away from rotating parts.9. Make sure the bit is not contacting the work-piece before the switch is turned on.10. Before using the tool on an actual workpiece,let it run for a while. Watch for vibration or wob-bling that could indicate improperly installedbit.11. Be careful of the bit rotating direction and thefeed direction.12. Do not leave the tool running. Operate the toolonly when hand-held.13. Always switch off and wait for the bit to come toa complete stop before removing the tool fromworkpiece.14. Do not touch the bit immediately after opera-tion; it may be extremely hot and could burnyour skin.15. Do not smear the tool base carelessly with thin-ner, gasoline, oil or the like. They may causecracks in the tool base.16. Draw attention to the need to use cutters of thecorrect shank diameter and which are suitablefor the speed of the tool.17. Some material contains chemicals which maybe toxic. Take caution to prevent dust inhalationand skin contact. Follow material suppliersafety data.18. Always use the correct dust mask/respirator forthe material and application you are workingwith.SAVE THESE INSTRUCTIONS.WARNING:MISUSE or failure to follow the safety rulesstated in this instruction manual may causeserious personal injury.