Makita 3606 Instruction Manual

Also see for 3606: Instruction manual Parts Breakdown Instruction manual Instruction manual Instruction manual

Contents

7Trimmer guide (optional accessory)003697Trimming, curved cuts in veneers for furniture and thelike can be done easily with the trimmer guide. Theguide roller rides the curve and assures a fine cut.Install the trimmer guide on the tool base with the wingbolt (B). Loosen the wing bolt (A) and adjust thedistance between the bit and the trimmer guide byturning the fine adjusting screw (1.5 mm or 1/16" perturn). At the desired distance, tighten the wing bolt (A) tosecure the trimmer guide in place. When adjusting theguide roller up or down, loosen the wing nut (C). Afteradjusting it, tighten the wing nut (C) securely.123 45003699When cutting, move the tool with the guide roller ridingthe side of the workpiece.312003701MAINTENANCECAUTION:• Always be sure that the tool is switched off andunplugged before attempting to perform inspectionor maintenance.• Never use gasoline, benzine, thinner, alcohol orthe like. Discoloration, deformation or cracks mayresult.To maintain product SAFETY and RELIABILITY, repairs,carbon brush inspection and replacement, any othermaintenance or adjustment should be performed byMakita Authorized or Factory Service Centers, alwaysusing Makita replacement parts.OPTIONAL ACCESSORIESCAUTION:• These accessories or attachments arerecommended for use with your Makita toolspecified in this manual. The use of any otheraccessories or attachments might present a risk ofinjury to persons. Only use accessory orattachment for its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Straight & groove forming bits• Edge forming bits• Laminate trimming bits• Straight guide assembly• Trimmer guide assembly• Templet guides• Templet guide adapter• Lock nut• Collet cone 1/4"• Wrench 17NOTE:• Some items in the list may be included in the toolpackage as standard accessories. They may differfrom country to country.1. Bit2. Guide roller3. Workpiece1. Wing bolt (B)2. Fine adjustingscrew3. Wing bolt (A)4. Wing nut (C)5. Guide roller