Makita 3620 Instruction Manual

Also see for 3620: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

712 34001985Straight guide003259The straight guide is effectively used for straight cutswhen chamfering or grooving.To install the straight guide, insert the guide bars into theholes in the tool base. Adjust the distance between thebit and the straight guide. At the desired distance, tightenthe wing bolts to secure the straight guide in place.12 3003260When cutting, move the tool with the straight guide flushwith the side of the workpiece.If the distance (A) between the side of the workpiece andthe cutting position is too wide for the straight guide, or ifthe side of the workpiece is not straight, the straightguide cannot be used. In this case, firmly clamp a straightboard to the workpiece and use it as a guide against therouter base. Feed the tool in the direction of the arrow.A003261Templet guide (Accessory)003262The templet guide provides a sleeve through which thebit passes, allowing use of the tool with templet patterns.To install the templet guide, loosen the screws on the toolbase, insert the templet guide and then tighten thescrews.1 23003263Secure the templet to the workpiece. Place the tool onthe templet and move the tool with the templet guidesliding along the side of the templet.1234 567003695NOTE:• The workpiece will be cut a slightly different sizefrom the templet. Allow for the distance (X)between the bit and the outside of the templet guide.The distance (X) can be calculated by using thefollowing equation:Distance (X) = (outside diameter of the templetguide - bit diameter) / 21. Bit2. Base3. Templet4. Workpiece5. Distance (X)6. Outsidediameter of thetemplet guide7. Templet guide1. Screw2. Base plate3. Templet guide1. Straight guide2. Guide bar3. Wing bolt1. Feed direction2. Bit revolvingdirection3. Workpiece4. Straight guide

/ 16

Related manuals for Makita 3620

Makita 3620 Instruction Manual

Makita 3606 Instruction Manual

This manual is suitable for:

3620

manualsdatabase

Your AI-powered manual search engine