Makita 4324 Instruction Manual

Also see for 4324: Instruction manual Instruction manual Parts manual Instruction manual Instruction manual

I IO \-Selecting the cutting actionThis tool can be oDerated with an orbital or0a straight line (up and down) cutting action.The orbital cutting action thrusts the bladeforward on the cutting stroke and greatlyincreases cutting speed.To change the cutting action, just turn thecutting action changing lever to the desiredcutting action position.Refer to the table below to select the cut-ting action.For cutting mild steel, stainless steel and plasticsFor clean cuts in wood and DlvwoodStraight line cutting actionc_IMedium Orbit cutting actionI1LeverI! IFor cutting wood and plywood.For fast cutting in aluminum and mild steel.Erp Cuttina action I1 1 1Applications ILarge orbit cutting action For fast cutting in wood and plywoodi I , .I 1 Small orbit cutting action I For cutting mild steel, aluminum and hard wood.appropriate speed may differ with the typeof thickness of the workpiece. In general,higher speeds will allow you to cut work-pieces faster but the service life of the badewill be reduced.Workpiece to be cut I Number on adjusting dialMild steelStainless steelAluminumPlastics I 1 - 4Speed adjusting dialr------CAUTION:The speed adjusting dial can be turned only as far as 6 and back to 1. Do not force it past 6or 1, or the speed adjusting function may not longer work.7