Makita 4333D Instruction Manual

Also see for 4331D: Instruction manual Instruction manual Instruction manual Instruction manual Technical information

Contents

5Michigan Drive, Tongwell, Milton Keynes, Bucks MK158JD, ENGLANDResponsible manufacturer:Makita Corporation Anjo Aichi Japan GEB016-1SPECIFIC SAFETY RULESDO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto jig saw safety rules. If you use this tool unsafelyor incorrectly, you can suffer serious personalinjury.1. Hold power tools by insulated grippingsurfaces when performing an operation wherethe cutting tool may contact hidden wiring orits own cord. Contact with a "live" wire will makeexposed metal parts of the tool "live" and shockthe operator.2. Use clamps or another practical way to secureand support the workpiece to a stable platform.Holding the work by hand or against your bodyleaves it unstable and may lead to loss of control.3. Always use safety glasses or goggles.Ordinary eye or sun glasses are NOT safetyglasses.4. Avoid cutting nails. Inspect workpiece for anynails and remove them before operation.5. Do not cut oversize workpiece.6. Check for the proper clearance beyond theworkpiece before cutting so that the blade willnot strike the floor, workbench, etc.7. Hold the tool firmly.8. Make sure the blade is not contacting theworkpiece before the switch is turned on.9. Keep hands away from moving parts.10. Do not leave the tool running. Operate the toolonly when hand-held.11. Always switch off and wait for the blade tocome to a complete stop before removing theblade from the workpiece.12. Do not touch the blade or the workpieceimmediately after operation; they may beextremely hot and could burn your skin.13. Do not operate the tool at no-loadunnecessarily.14. Some material contains chemicals which maybe toxic. Take caution to prevent dustinhalation and skin contact. Follow materialsupplier safety data.15. Always use the correct dust mask/respiratorfor the material and application you areworking with.SAVE THESE INSTRUCTIONS.WARNING:MISUSE or failure to follow the safety rules stated inthis instruction manual may cause serious personalinjury. ENC004-1IMPORTANT SAFETYINSTRUCTIONSFOR BATTERY CARTRIDGE1. Before using battery cartridge, read allinstructions and cautionary markings on (1)battery charger, (2) battery, and (3) productusing battery.2. Do not disassemble battery cartridge.3. If operating time has become excessivelyshorter, stop operating immediately. It mayresult in a risk of overheating, possible burnsand even an explosion.4. If electrolyte gets into your eyes, rinse themout with clear water and seek medicalattention right away. It may result in loss ofyour eyesight.5. Always cover the battery terminals with thebattery cover when the battery cartridge is notused.6. Do not short the battery cartridge:(1) Do not touch the terminals with anyconductive material.(2) Avoid storing battery cartridge in acontainer with other metal objects such asnails, coins, etc.(3) Do not expose battery cartridge to wateror rain.A battery short can cause a large currentflow, overheating, possible burns andeven a breakdown.7. Do not store the tool and battery cartridge inlocations where the temperature may reach orexceed 50 ﾟ C (122 ﾟ F).8. Do not incinerate the battery cartridge even ifit is severely damaged or is completely wornout. The battery cartridge can explode in a fire.9. Be careful not to drop or strike battery.SAVE THESE INSTRUCTIONS.Tips for maintaining maximum battery life1. Charge the battery cartridge beforecompletely discharged.Always stop tool operation and charge thebattery cartridge when you notice less toolpower.2. Never recharge a fully charged batterycartridge.Overcharging shortens the battery service life.3. Charge the battery cartridge with room