Makita 5007NB Instruction Manual

Also see for 5007NB: Instruction manual Parts list Parts Breakdown Instruction manual Instruction manual

Contents

Makita 5007NB Instruction Manual Manual pdf 6 page image

6FUNCTIONALDESCRIPTION CAUTION:• Always be sure that the tool is switched off and unplugged beforeadjusting or checking function on the tool.Adjusting depth of cutCAUTION:• After adjusting the depth of cut, always tighten the lever securely.Loosen the lever on the depth guide and move the base up or down. At thedesired depth of cut, secure the base by tightening the lever.For cleaner, safer cuts, set cut depth so that no more than one blade toothprojects below workpiece. Using proper cut depth helps to reduce potential fordangerous KICKBACKS which can cause personal injury.Bevel cuttingLoosen the clamping screw on the bevel scale plate on the front of the base.Set for the desired angle (0° - 45°) by tilting accordingly, then tighten theclamping screw securely.SightingFor straight cuts, align the A position on the front of the base with your cuttingline. For 45° bevel cuts, align the B position with it.1. Depth guide2. Lever120013391. Bevel scale plate2. Clamping screw120013571. Base1B A001374