Makita 5077B Instruction Manual

Also see for 5077B: Parts Breakdown

Removing or installing saw bladeCAUTION :Always b e sure that the tool is switched off and unplugged before removing or installingthe blade.To remove the blade, press the shaft lockso that the blade cannot revolve and usethe wrench to loosen the hex bolt clock-wise. Then remove the hex bolt, outerflange and blade.To install the blade, follow the removalprocedure in reverse. BE SURE TOTIGHTEN THE HEX BOLT SECURELY.CAUTION :.Be sure the blade i s installed with teethpointing up a t the front of the tool.*Use only the Makita wrenches to installor remove the blade.*One side of the inner flange i s for 5/8"hole diameter of the blade; the other sidei s for 13/16" hole diameter.inner flange \Fig. 9Blade Outer flangeIFig. 1(Use the correct side for the hole diameter of the blade you intend to use. Mounting theblade on the wrong side can result in dangerous vibration.a