Makita 5477NB Instruction Manual

Also see for 5477NB: Instruction manual Technical information

Contents

Makita 5477NB Instruction Manual Manual pdf 2 page image

2ENGLISH (Original instructions)SPECIFICATIONSModel 5477NBBlade diameter 185 mmat 90° 60 mmat 45° 44 mmMax. Cutting depthat 50° 40 mmNo load speed (min -1) 4,500Overall length 442 mmNet weight 6.5 kgSafety class /II• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003END201-7SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.･ Read instruction manual.･ DOUBLE INSULATION･ Only for EU countriesDo not dispose of electric equipmenttogether with household waste material!In observance of the European Directive,on Waste Electric and ElectronicEquipment and its implementation inaccordance with national law, electricequipment that have reached the end oftheir life must be collected separatelyand returned to an environmentallycompatible recycling facility. ENE028-1Intended useThe tool is intended for performing lengthways andcrossways straight cuts and mitre cuts with angles inwood while in firm contact with the workpiece. ENF002-2Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, and canonly be operated on single-phase AC supply. They aredouble-insulated and can, therefore, also be used fromsockets without earth wire.GEA005-3General Power Tool SafetyWarningsWARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings andinstructions for future reference.The term "power tool" in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Work area safety1. Keep work area clean and well lit. Cluttered ordark areas invite accidents.2. Do not operate power tools in explosiveatmospheres, such as in the presence offlammable liquids, gases or dust. Power toolscreate sparks which may ignite the dust or fumes.3. Keep children and bystanders away whileoperating a power tool. Distractions can causeyou to lose control.Electrical safety4. Power tool plugs must match the outlet. Nevermodify the plug in any way. Do not use anyadapter plugs with earthed (grounded) powertools. Unmodified plugs and matching outlets willreduce risk of electric shock.5. Avoid body contact with earthed or groundedsurfaces such as pipes, radiators, ranges andrefrigerators. There is an increased risk ofelectric shock if your body is earthed or grounded.6. Do not expose power tools to rain or wetconditions. Water entering a power tool willincrease the risk of electric shock.