Makita 6013B Instruction Manual
Also see for 6013B: Instruction manualInstruction manualInstruction manualInstruction manualInstruction manual
                                |
3ENGLISH (Original instructions)Explanation of general view1 Switch trigger2 Lock button3 Counterclockwise4 Clockwise5 Chuck key6 Tighten7 Sleeve8 Ring9 Limit mark10 Brush holder cap11 ScrewdriverSPECIFICATIONSModel 6013B 6013BRCapacitiesSteel ....................................................................................................... 13 mm 13 mmWood ...................................................................................................... 36 mm 36 mmNo load speed (min–1) ............................................................................... 550 550Overall length ............................................................................................ 340 mm 340 mmNet weight .................................................................................................. 2.9 kg 2.9 kgSafety class ................................................................................................ /II /II• Due to our continuing program of research and devel-opment, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003Intended useThe tool is intended for drilling in wood, metal and plastic.Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, and canonly be operated on single-phase AC supply. They aredouble-insulated in accordance with European Standardand can, therefore, also be used from sockets withoutearth wire. GEA010-1General Power Tool Safety WarningsWARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings and instructions for future refer-ence.GEB001-6DRILL SAFETY WARNINGS1. Use auxiliary handle(s), if supplied with the tool.Loss of control can cause personal injury.2. Hold power tool by insulated gripping surfaces,when performing an operation where the cuttingaccessory may contact hidden wiring or its owncord. Cutting accessory contacting a “live” wire maymake exposed metal parts of the power tool “live”and could give the operator an electric shock.3. Always be sure you have a firm footing.Be sure no one is below when using the tool inhigh locations.4. Hold the tool firmly.5. Keep hands away from rotating parts.6. Do not leave the tool running. Operate the toolonly when hand-held.7. Do not touch the drill bit or the workpiece imme-diately after operation; they may be extremelyhot and could burn your skin.8. Some material contains chemicals which may betoxic. Take caution to prevent dust inhalationand skin contact. Follow material supplier safetydata.SAVE THESE INSTRUCTIONS.WARNING:DO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto safety rules for the subject product. MISUSE orfailure to follow the safety rules stated in this instruc-tion manual may cause serious personal injury. |
Related manuals for Makita 6013B
manualsdatabase
Your AI-powered manual search engine