Makita 6207D-NEW Technical Information

Repair P 5/ 8< 6 > Assembling speed change lever1. Before assembling, make sure that 2 compression springs are installed in the speed change lever. See fig. 6.2. Assemble speed change lever to the boss of gear assembly as illustrated in Fig. 6A.3. After assembling, slide the speed change lever to the change ring side or yoke assembling sideand keep its slid position.< 7 > Assembling mode change lever and housing1. Hitch the hook of tension spring 2 to gear assembly and another hook to mode change lever as illustrated in Fig. 7.2. Assemble mode change lever to gear assembly by inserting the boss of mode change lever into the grooveof gear assembly as illustrated in Fig. 7.3. Assemble motor section (yoke, armature and endbell) to gear assembly. Assemble them to housing L as illustratedin Fig. 7A.Yoke assemblingsideYoke assembling side2 compressionspringsSpeed changeleverBoss ofgear assemblyFig. 6Fig. 6AChange ringsideChange ringFor assembling speed change lever,approach from yoke assembling side.And press speed change lever to theboss of gear assembly.Tension spring 2Mode change leverFig. 7Fig. 7AAligning the cut portion ofyoke with the boss of housing L,assemble gear assembly and motorsection to housing L.Housing LMotor section(yoke, armature and endbell)

/ 8

Related manuals for Makita 6207D-NEW