Makita 6211DH Instruction Manual

ADDITIONAL SAFETY RULESFOR CHARGER & BATTERY CARTRIDGE1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF)2. Do not attempt to use a step-up transformer, an engine generator or DC power3.Do not allow anything t o cover or clog the charger vents.4. Always cover the battery terminals with the battery cover when the battery5. A battery short can cause a large current flow, overheating, possible burnsor ABOVE 4OoC (104OF).receptacle.cartridge is not used.and even a breakdown.(1) Do not touch the terminals with any conductive material.(2) Avoid storing battery cartridge in a container with other metal objects such(3)Do not expose battery cartridge t o water or rain.may reach or exceed 35" C (95" F).completely worn out. The battery cartridge can explode in a fire.as nails, coins, etc.6. Do not store the tool and Battery Cartridge in locations where the temperature7. Do not incinerate the Battery Cartridge even if it is severely damaged or isADDITIONAL SAFETY RULES1. Be aware that this tool is always in an operating condition, because it does2. Always be sure you have a firm footing.3.Hold the tool firmly.4. Keep hands away from rotating parts.5. When drilling into walls, floors or wherever "live" electrical wires may beencountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!Hold the tool only by the insulated grasping surfaces t o prevent electric shockif you drill into a "live" wire.not have to be plugged into an electrical outlet.Be sure no one is below when using the tool in high locations.6. Do not leave the tool running. Operate the tool only when hand-held.7. Do not touch the drill bit or the workpiece immediately after operation; theymay be extremely hot and could burn your skin.SAVE THESE INSTRUCTIONS.5