Makita 6319D Instruction Manual
Also see for 6319D: Instruction manualInstruction manualInstruction manualInstruction manualInstruction manual
                                                | |
4The noise level under working may exceed 80 dB (A).Wear ear protection. ENG202-3VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745:Work mode: Drilling into metalVibration emission (ah,D) : 2.5 m/s 2 or lessUncertainty (K) : 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard testmethod and may be used for comparing one toolwith another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of thepower tool can differ from the declared emissionvalue depending on the ways in which the tool isused.• Be sure to identify safety measures to protect theoperator that are based on an estimation ofexposure in the actual conditions of use (takingaccount of all parts of the operating cycle such asthe times when the tool is switched off and when itis running idle in addition to the trigger time).ENH101-12EC Declaration of ConformityWe Makita Corporation as the responsiblemanufacturer declare that the following Makitamachine(s):Designation of Machine: Cordless Driver DrillModel No./ Type: 6319D,6339D,6349Dare of series production andConforms to the following European Directives:98/37/EC until 28th December 2009 and then with2006/42/EC from 29th December 2009And are manufactured in accordance with the followingstandards or standardised documents:EN60745The technical documentation is kept by our authorisedrepresentative in Europe who is:Makita International Europe Ltd,Michigan, Drive, Tongwell,Milton Keynes, MK15 8JD, England30th January 2009000230Tomoyasu KatoDirectorMakita Corporation3-11-8, Sumiyoshi-cho,Anjo, Aichi, JAPANGEA010-1General Power Tool SafetyWarningsWARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings and instructions forfuture reference. GEB001-4SPECIFIC SAFETY RULESDO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto drill safety rules. If you use this power toolunsafely or incorrectly, you can suffer seriouspersonal injury.1. Use auxiliary handle(s), if supplied with thetool. Loss of control can cause personal injury.2. Hold power tool by insulated grippingsurfaces, when performing an operationwhere the cutting accessory may contacthidden wiring or its own cord. Cuttingaccessory contacting a "live" wire may makeexposed metal parts of the power tool "live" andcould give the operator an electric shock.3. Always be sure you have a firm footing.Be sure no one is below when using the tool inhigh locations.4. Hold the tool firmly.5. Keep hands away from rotating parts.6. Do not leave the tool running. Operate the toolonly when hand-held.7. Do not touch the drill bit or the workpieceimmediately after operation; they may beextremely hot and could burn your skin.8. Some material contains chemicals which maybe toxic. Take caution to prevent dustinhalation and skin contact. Follow materialsupplier safety data.SAVE THESE INSTRUCTIONS.WARNING:MISUSE or failure to follow the safety rules stated inthis instruction manual may cause serious personalinjury. |
Related manuals for Makita 6319D
Makita 6319D Instruction Manual
Makita 6319D Instruction Manual
Makita 6319D Instruction Manual
Makita 6319D Instruction Manual
Makita 6319D Instruction Manual
Makita 6319D Instruction Manual
Makita 6319D Instruction Manual
Makita 6310 Instruction Manual
Makita 6310 Instruction Manual
Makita 6310 Instruction Manual
manualsdatabase
Your AI-powered manual search engine