Makita 6402 Instruction Manual

Also see for 6402: Instruction manual Instruction manual Parts Breakdown Instruction manual Instruction manual

Contents

425. Keep handles dry, clean and free from oil andgrease. GEB001-2SPECIFIC SAFETY RULESDO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto drill safety rules. If you use this power toolunsafely or incorrectly, you can suffer seriouspersonal injury.1. Use auxiliary handles supplied with the tool.Loss of control can cause personal injury.2. Hold power tools by insulated grippingsurfaces when performing an operation wherethe cutting tool may contact hidden wiring orits own cord. Contact with a "live" wire will makeexposed metal parts of the tool "live" and shockthe operator.3. Always be sure you have a firm footing.Be sure no one is below when using the tool inhigh locations.4. Hold the tool firmly.5. Keep hands away from rotating parts.6. Do not leave the tool running. Operate the toolonly when hand-held.7. Do not touch the drill bit or the workpieceimmediately after operation; they may beextremely hot and could burn your skin.8. Some material contains chemicals which maybe toxic. Take caution to prevent dustinhalation and skin contact. Follow materialsupplier safety data.SAVE THESE INSTRUCTIONS.WARNING:MISUSE or failure to follow the safety rules stated inthis instruction manual may cause serious personalinjury.FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking function onthe tool.Switch action21345004621CAUTION:• Before plugging in the tool, always check to seethat the switch trigger actuates properly andreturns to the "OFF" position when released.To start the tool, simply pull the switch trigger. Toolspeed is increased by increasing pressure on the switchtrigger. Release the switch trigger to stop.For continuous operation, pull the switch trigger andthen push in the lock button.To stop the tool from the locked position, pull the switchtrigger fully, then release it.A speed control screw is provided so that maximum toolspeed can be limited (variable).Turn the speed control screw clockwise for higher speed,and counterclockwise for lower speed.Reversing switch actionFor Model DP4700 only1004628This tool has a reversing switch to change the rotationaldirection. Move the reversing switch lever tothe position for clockwise (forward) rotation orthe position for counterclockwise (reverse) rotation.1. Reversingswitch lever1. Low2. High3. Speed controlscrew4. Switch trigger5. Lock button