Makita 6402 Instruction Manual

Also see for 6402: Instruction manual Instruction manual Parts Breakdown Instruction manual Instruction manual

Contents

4ENGLISHExplanation of general view1 Side grip2 Tighten3 Chuck key4 Sleeve5 Ring6 High7 Low8 Speed control screw9 Switch trigger10 Lock button11 Reversing switch lever12 Reversing switch leverSPECIFICATIONSModel 6402 DP4700CapacitiesSteel .................................................................................. 10 mm 13 mmWood ................................................................................. 21 mm 36 mmNo load speed (min –1) ......................................................... 0 – 1,200 0 – 550Overall length ....................................................................... 264 mm 275 mmNet weight ............................................................................ 1.7 kg 2.0 kg• Due to our continuing program of research anddevelopment, the specifications herein are subjectto change without notice.• Note: Specifications may differ from country tocountry.Power supplyThe tool should be connected only to a power supplyof the same voltage as indicated on the nameplate,and can only be operated on single-phase AC supply.They are double-insulated in accordance with Euro-pean Standard and can, therefore, also be used fromsockets without earth wire.Safety hintsFor your own safety, please refer to the enclosedsafety instructions.SAFETY INSTRUCTIONSWarning! When using electric tools, basic safetyprecautions should always be followed to reducethe risk of fire, electric shock and personal injury,including the following. Read all these instruc-tions before attempting to operate this productand save these instructions.For safe operation:1. Keep work area cleanCluttered areas and benches invite injuries.2. Consider work area environmentDon’t expose power tools to rain. Don’t usepower tools in damp or wet locations. Keep workarea well lit. Don’t use power tools in presence offlammable liquids or gases.3. Guard against electric shockPrevent body contact with grounded surfaces(e.g. pipes, radiators, ranges, refrigerators).4. Keep children awayDo not let visitors contact tool or extension cord.All visitors should be kept away from work area.5. Store idle toolsWhen not in use, tools should be stored in dry,high, or locked-up place, out of the reach of chil-dren.6. Don’t force toolIt will do the job better and safer at the rate forwhich it was intended.7. Use right toolDon’t force small tools or attachments to do thejob of a heavy duty tool. Don’t use tools for pur-poses not intended; for example, don’t use circu-lar saw for cutting tree limbs or logs.8. Dress properlyDo not wear loose clothing or jewelry. They canbe caught in moving parts. Rubber gloves andnon-skid footwear are recommended when work-ing outdoors. Wear protective hair covering tocontain long hair.9. Use safety glasses and hearing protectionAlso use face or dust mask if cutting operation isdusty.10. Connect dust extraction equipmentIf devices are provided for the connection of dustextraction and collection facilities, ensure theseare connected and properly used.11. Don’t abuse cordNever carry tool by cord or yank it to disconnect itfrom receptacle. Keep cord from heat, oil andsharp edges.12. Secure workUse clamps or a vise to hold work. It’s safer thanusing your hand and it frees both hands to oper-ate tool.13. Don’t overreachKeep proper footing and balance at all times.14. Maintain tools with careKeep tools sharp and clean for better and saferperformance. Follow instructions for lubricatingand changing accessories. Inspect tool cordsperiodically and, if damaged, have repaired byauthorized service facility. Inspect extensioncords periodically and replace if damaged. Keephandles dry, clean and free from oil and grease.15. Disconnect toolsWhen not in use, before servicing, and whenchanging accessories such as blades, bits andcutters.