Makita 6807 Instruction Manual

Also see for 6807: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

6FUNCTIONALDESCRIPTION CAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking function on thetool.Depth adjustmentThe depth can be adjusted by turning the locking sleeve.Turn it in “A” direction for less depth and in “B” direction formore depth. One full turn of the locking sleeve equals 1.5mm (1/16”) change in depth.Adjust the locking sleeve so that the distance between the tip ofthe locator and the screw head is approximately 1 mm (3/64”)as shown in the figure. Drive a trial screw into your material or apiece of duplicate material. If the depth is still not suitable forthe screw, continue adjusting until you obtain the proper depthsetting.1. Locking sleeve1 AB0035571. Approx. 1mm (3/64”)2. Locator1. Approx. 1mm (3/64”)2. Locator12A00355812003559