Makita 6807 Instruction Manual

Also see for 6807: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

4GEB017-4SCREWDRIVER SAFETYWARNINGS1. Hold power tool by insulated grippingsurfaces, when performing an operationwhere the fastener may contact hidden wiringor its own cord. Fasteners contacting a "live"wire may make exposed metal parts of the powertool "live" and could give the operator an electricshock.2. Always be sure you have a firm footing.Be sure no one is below when using the toolin high locations.3. Hold the tool firmly.4. Keep hands away from rotating parts.5. Do not touch the bit or the workpieceimmediately after operation; they may beextremely hot and could burn your skin.SAVE THESE INSTRUCTIONS.WARNING:DO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto safety rules for the subject product. MISUSE orfailure to follow the safety rules stated in thisinstruction manual may cause serious personalinjury. USD201-2SymbolsThe followings show the symbols used for tool.읭 volts읭 amperes읭 hertz읭 alternating current읭 no load speed읭 Class II Construction읭 revolutions or reciprocation per minuteFUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking functionon the tool.Depth adjustment1 AB003557The depth can be adjusted by turning the locking sleeve.Turn it in "A" direction for less depth and in "B" directionfor more depth. One full turn of the locking sleeveequals 1.5 mm (1/16") change in depth.Adjust the locking sleeve so that the distance betweenthe tip of the locator and the screw head isapproximately 1 mm (3/64") as shown in the figure.Drive a trial screw into your material or a piece ofduplicate material. If the depth is still not suitable for thescrew, continue adjusting until you obtain the properdepth setting.12A003558120035591. Approx. 1mm(3/64")2. Locator1. Approx. 1mm(3/64")2. Locator1. Locking sleeve