Makita 6835D Instruction Manual

Also see for 6835D: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

12Carry hookThe carry hook is convenient for temporarily hooking the tool.It can be installed on either side of the tool.When installing or removing the carry hook, widen it bypressing its lower portion in the direction of the arrow.Installing set plate (optional accessory)Always install the set plate when using battery cartridges1200, 1202 or 1202A. Install the set plate on the tool with thescrew provided.OPERATION Driving operationSwitch on the tool by pulling the switch trigger. Hold the toolsquarely and firmly up against the driving surface. A screwwill be automatically carried to the driving position and fas-tened.CAUTION:• Always check the bit carefully for wear before drivingoperations. Replace a worn bit or poor fastening mayresult.• Always hold the tool squarely against the driving surface.Holding it at an angle may damage the screw heads andcause wear on the bit. This may also lead to poorfastening.• Always keep the tool firmly against the driving surfaceuntil the driving is over. Failure to do so may causeinsufficient fastening of screws.• Be careful not to drive a screw onto another screwalready fastened.1. Hook00188411. Screw2. Set plate00188512001886