Makita 6906 Instruction Manual

Also see for 6905B: Instruction manual Parts Breakdown Instruction manual Instruction manual Instruction manual

Contents

Makita 6906 Instruction Manual Manual pdf 2 page image

2ENGLISHSPECIFICATIONS• Due to our continuing programme of research and development, the specifications herein are subject to changewithout notice.• Note: Specifications may differ from country to country.GENERAL SAFETY RULESGEA001-3WARNING:Read all instructions. Failure to follow allinstructions listed below may result inelectric shock, fire and/or serious injury. Theterm “power tool” in all of the warnings listedbelow refers to your mains-operated(corded) power tool or battery-operated(cordless) power tool.SAVE THESE INSTRUCTIONSWork area safety1. Keep work area clean and well lit. Cluttered anddark areas invite accidents.2. Do not operate power tools in explosiveatmospheres, such as in the presence offlammable liquids, gases or dust. Power toolscreate sparks which may ignite the dust or fumes.3. Keep children and bystanders away whileoperating a power tool. Distractions can cause youto lose control.Electrical safety4. Power tool plugs must match the outlet. Nevermodify the plug in any way. Do not use anyadapter plugs with earthed (grounded) powertools. Unmodified plugs and matching outlets willreduce risk of electric shock.5. Avoid body contact with earthed or groundedsurfaces such as pipes, radiators, ranges andrefrigerators. There is an increased risk of electricshock if your body is earthed or grounded.6. Do not expose power tools to rain or wetconditions. Water entering a power tool willincrease the risk of electric shock.7. Do not abuse the cord. Never use the cord forcarrying, pulling or unplugging the power tool.Keep cord away from heat, oil, sharp edges ormoving parts. Damaged or entangled cordsincrease the risk of electric shock.8. When operating a power tool outdoors, use anextension cord suitable for outdoor use. Use of acord suitable for outdoor use reduces the risk ofelectric shock.Personal safety9. Stay alert, watch what you are doing and usecommon sense when operating a power tool. Donot use a power tool while you are tired or underthe influence of drugs, alcohol or medication. Amoment of inattention while operating power toolsmay result in serious personal injury.10. Use safety equipment. Always wear eyeprotection. Safety equipment such as dust mask,non-skid safety shoes, hard hat, or hearingprotection used for appropriate conditions willreduce personal injuries.11. Avoid accidental starting. Ensure the switch is inthe off-position before plugging in. Carryingpower tools with your finger on the switch orplugging in power tools that have the switch oninvites accidents.12. Remove any adjusting key or wrench beforeturning the power tool on. A wrench or a key leftattached to a rotating part of the power tool mayresult in personal injury.13. Do not overreach. Keep proper footing andbalance at all times. This enables better control ofthe power tool in unexpected situations.Model 6905B 6906Capacities Bolt size M12 - M20 (1/2” - 3/4”) M16 - M22 (5/8” - 7/8”)Square drive 12.7 mm (1/2”) 19 mm (3/4”)No load speed (RPM) 1,700/min. 1,700/min.Impacts per minute 2,000 1,600Max. fastening torque 294 N.m (217 ft.lbs) 588 N.m (433 ft.lbs)Overall length 270 mm (10-1/4”) 327 mm (12-7/8”)Net weight 2.7 kg (6 lbs) 5 kg (11 lbs)