TECHNICAL INFORMATIONFor ModelsDescriptionNew ToolCONCEPTION AND MAIN APPLICATIONSStandard equipmentOptional accessoriesSpecificationsMotorBatteryNo load speedImpacts per minuteMax. tightening torqueCapacitiesNet weightDC 9.6V magnet motorBattery 9122(Ni-Cd, 9.6V, 2.0Ah)0~2200rpm0~2800800kgf.cm (700in.lbs)M4~M8(5/32"~5/16")M4~M12(5/32"~1/2")M5~M10(3/16"~3/8")22~90mm(7/8"~3-1/2")M4~M6 x 13~45mm(5/32"~1/4" x 1/2"~1-3/4")Machine screwStandard boltHigh tensile boltCoarse threadSelf drilling1.4kg (3.1lbs)Model Battery(2.0Ah) Fast charger Plastic carrying case6908DA Battery9122 No No77mm (3")232mm (9-1/8")171mm (6-3/4")6908DWA Battery9122 DC1410 YesCordless Impact Driver6908DThis 9.6V cordless impact driver is upgraded version of existingModel 6903VD and its brief benefits are;*Faster driving speed*More number of driving screws from a single charge*Compact design and good balance*Lower vibration and lower noise*Motor is more endurable and longer life.*Carbon brushes can be replaced without dis-assembling housing.*New switch has wider area of stroke for variable speed so thatspeed control becomes easier.*Reversing switch button located at the top of the handle so thatuser can change direction easily leaving the other hand free.*Battery 9122(2.0Ah) can be removed easily by pushing buttons.Phillips Bit 2-65...1pc. Battery Cover...1pc. Set Plate(to use battery without push buttons)...1pc.Plastic Carrying Case(6908DWA only)...1pc.The Standard equipment for the tools shown may differ from country to country.Phillips Bit 2-65, 3-65 Bit Piece Socket Bit 7-55, 8-55, 10-55, 10-70, 12-86, 13-55, 14-55, 17-55Keyless Drill Chuck Drill ChuckBattery 9100, 9102, 9122, 9102A Fast Charger DC1201, DC1209, DC1410