Makita 6914D Instruction Manual

Also see for 6914D: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

4ADDITIONAL SAFETY RULES FOR TOOL ENB024-11. Be aware that this tool is always in an operatingcondition, because it does not have to beplugged into an electrical outlet.2. Hold tool by insulated gripping surfaces whenperforming an operation where the cutting toolmay contact hidden wiring. Contact with a “live”wire will also make exposed metal parts of the tool“live” and shock the operator.3. Always be sure you have a firm footing.Be sure no one is below when using the tool inhigh locations.4. Hold the tool firmly.5. Wear ear protectors.SAVE THESE INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS FORBATTERY CARTRIDGE ENC004-11. Before using battery cartridge, read all instruc-tions and cautionary markings on (1) batterycharger, (2) battery, and (3) product using bat-tery.2. Do not disassemble battery cartridge.3. If operating time has become excessivelyshorter, stop operating immediately. It mayresult in a risk of overheating, possible burnsand even an explosion.4. If electrolyte gets into your eyes, rinse them outwith clear water and seek medical attention rightaway. It may result in loss of your eyesight.5. Always cover the battery terminals with the bat-tery cover when the battery cartridge is notused.6. Do not short the battery cartridge:(1) Do not touch the terminals with any con-ductive material.(2) Avoid storing battery cartridge in a con-tainer with other metal objects such asnails, coins, etc.(3) Do not expose battery cartridge to water orrain.A battery short can cause a large current flow,overheating, possible burns and even a break-down.7. Do not store the tool and battery cartridge inlocations where the temperature may reach orexceed 50°C (122°F).8. Do not incinerate the battery cartridge even if itis severely damaged or is completely worn out.The battery cartridge can explode in a fire.9. Be careful not to drop or strike battery.SAVE THESE INSTRUCTIONSTips for maintaining maximum battery life1. Charge the battery cartridge before completelydischarged.Always stop tool operation and charge the bat-tery cartridge when you notice less tool power.2. Never recharge a fully charged battery cartridge.Overcharging shortens the battery service life.3. Charge the battery cartridge with room tempera-ture at 10°C - 40°C (50°F - 104°F). Let a hot bat-tery cartridge cool down before charging it.4. Charge the Nickel Metal Hydride battery car-tridge when you do not use it for more than sixmonths.