Makita 6922NB Instruction Manual

Also see for 6922NB: Instruction manual Parts Breakdown Parts Breakdown Instruction manual Instruction manual

Contents

5OPERATIONBolt installationSlip the tool onto the bolt so that the inner sleeve com-pletely covers the bolt tip.CAUTION:• Be careful when fitting the sleeve onto the bolt tip.Striking the tip can damage it so that it will nolonger fit inside the sleeve properly.Keep forward pressure on the tool while sliding it furtherforward until the outer sleeve fits completely over the nut.If the tool fails to fit completely over the nut, twist the toolslightly right and left while pushing forward.Pull the switch trigger. The outer sleeve turns to begintightening the nut.When the specified torque is attained, the bolt tip will besheared at its notched portion. The bolt tip will remaininside the inner sleeve.Release the switch trigger and withdraw the tool in astraight line.Press the tip ejector (tip lever) to eject the bolt tip fromthe tool. Catch the sheared bolt tips to prevent them fromfalling dangerously below. Keep the tips off of the ground,floor, walkways, etc. to prevent injury from tripping or fall-ing.1. There should beno gap betweenthe outer sleeveand the tool.2. Outer sleeve3. Screw1. Inner sleeve2. Bolt tip1. Outer sleeve2. Nut12300498812004989120049901. Notched portion2. Bolt tip1. Outer sleeve1. Bolt tip1. Tip ejector (Tiplever)12004991100499210049931004994