102. To reduce the risk of “white finger disease”, keep yourhands warm during operation and well maintain thetool and accessories.Transport1. Before transporting the tool, turn it off and remove thebattery cartridge. Attach the cover to the cutting blade.2. When transporting the tool, carry it in a horizontalposition by holding the shaft.3. When transporting the tool in a vehicle, properlysecure it to avoid turnover. Otherwise damage to thetool and other baggage may result.Maintenance1. Have your tool serviced by our authorized servicecenter, always using only genuine replacement parts.Incorrect repair and poor maintenance can shorten thelife of the tool and increase the risk of accidents.2. Before doing any maintenance or repair work orcleaning the tool, always turn it off and remove thebattery cartridge.3. Always wear protective gloves when handling thecutting blade.4. Always clean dust and dirt off the tool. Never usegasoline, benzine, thinner, alcohol or the like for thepurpose. Discoloration, deformation or cracks of theplastic components may result.5. After each use, tighten all screws and nuts.6. Do not attempt any maintenance or repair notdescribed in the instruction manual. Ask ourauthorized service center for such work.7. Always use our genuine spare parts and accessoriesonly. Using parts or accessories supplied by a thirdparty may result in the tool breakdown, propertydamage and/or serious injury.8. Request our authorized service center to inspect andmaintain the tool at regular interval.Storage1. Before storing the tool, perform full cleaning andmaintenance. Remove the battery cartridge. Attachthe cover to the cutting blade.2. Store the tool in a dry and high or locked location outof reach of children.3. Do not prop the tool against something, such as awall. Otherwise it may fall suddenly and cause aninjury.First aid1. Always have a first-aid kit close by. Immediatelyreplace any item taken from the first aid kit.2. When asking for help, give the following information:– Place of the accident– What happened– Number of injured persons– Nature of the injury– Your nameSAVE THESE INSTRUCTIONS.WARNING:DO NOT let comfort or familiarity with product (gainedfrom repeated use) replace strict adherence to safetyrules for the subject product. MISUSE or failure tofollow the safety rules stated in this instructionmanual may cause serious personal injury.IMPORTANT SAFETYINSTRUCTIONS ENC007-8FOR BATTERY CARTRIDGE1. Before using battery cartridge, read allinstructions and cautionary markings on (1)battery charger, (2) battery, and (3) product usingbattery.2. Do not disassemble battery cartridge.3. If operating time has become excessively shorter,stop operating immediately. It may result in a riskof overheating, possible burns and even anexplosion.4. If electrolyte gets into your eyes, rinse them outwith clear water and seek medical attention rightaway. It may result in loss of your eyesight.5. Do not short the battery cartridge:(1) Do not touch the terminals with anyconductive material.(2) Avoid storing battery cartridge in a containerwith other metal objects such as nails, coins,etc.(3) Do not expose battery cartridge to water orrain.A battery short can cause a large current flow,overheating, possible burns and even abreakdown.6. Do not store the tool and battery cartridge inlocations where the temperature may reach orexceed 50°C (122°F).7. Do not incinerate the battery cartridge even if it isseverely damaged or is completely worn out. Thebattery cartridge can explode in a fire.8. Be careful not to drop or strike battery.9. Do not use a damaged battery.10. Follow your local regulations relating to disposalof battery.SAVE THESE INSTRUCTIONS.Tips for maintaining maximum battery life1. Charge the battery cartridge before completelydischarged.Always stop tool operation and charge the batterycartridge when you notice less tool power.2. Never recharge a fully charged battery cartridge.Overcharging shortens the battery service life.3. Charge the battery cartridge with roomtemperature at 10°C - 40°C (50°F - 104°F). Let a hotbattery cartridge cool down before charging it.4. Charge the battery cartridge once in every sixmonths if you do not use it for a long period oftime.