Makita BBC300L Instruction Manual

Also see for BBC300L: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Makita BBC300L Instruction Manual Manual pdf 11 page image

11cord on it.1280mm010992Hook the center of new nylon cord into the notch in thecenter of the spool, with one end of the cord extendingabout 80 mm (3-1/8") more than the other.Then wind both ends firmly around the spool in thedirection of the head rotation (left-hand directionindicated by LH and right-hand direction by RH on theside of the spool).100mm1010993Wind all but about 100 mm (3-15/16") of the cords,leaving the ends temporarily hooked through a notch onthe side of the spool.1010994Mount the spool in the housing so that the grooves andprotrusions on the spool match up with those in thehousing. Keep the side with letters on the spool visibleon the top. Now, unhook the ends of the cord from theirtemporary position and feed the cords through theeyelets to come out of the housing.123010776Align the protrusion on the underside of the cover withthe slots of the eyelets. Then push cover firmly onto thehousing to secure it. Make sure the latches fully spreadin the cover.To maintain product SAFETY and RELIABILITY, repairs,any other maintenance or adjustment should beperformed by Makita Authorized or Factory ServiceCenters, always using Makita replacement parts.TROUBLE SHOOTINGBefore asking for repairs, first, conduct your owninspection. If you find a problem that is not explained inthe manual, do not rashly dismantle the equipment.Instead, ask Makita Authorized or Factory ServiceCenters, always using Makita replacement parts.1. Cover2. Protrusion (Notshown)3. Slot of theeyelet1. Eyelets1. Notches1. Spool2. For left handrotation