Makita BFH040 Technical Information

Also see for BFH040: Instruction manual Instruction manual

Contents

Makita BFH040 Technical Information Manual pdf 6 page image

Repair P 6 / 17(5) Insert hex wrench into the hole of spindle and hold the hex wrench with vise. Insert torx wrench T25 intothe hole of torx counter sunk head screw M5x10. And turn torx wrench T25 anti-clockwise. See Fig. 21.(6) After removing torx counter sunk head screw M5x10, the clutch section can be disassembled in the order offlat washer 7, steel balls 3.0, cam A and steel balls 4. See Fig. 22.Remove steel balls 5. Then, cam B can be removed from spindle. See Fig. 23.Torx counter sunkhead screw M5x10.Torx counter sunkhead screw M5x10.Hex wrench Torx wrench T256mmSteel balls 3.0(13 pcs.)Flat washer 7Cam APay attention, not to lose steelballs, when disassembling.Use the hex wrench with thefollowing size.Steel ball 4(3 pcs.)Cam DSteel ball 5(3 pcs.)Cam BSpindleFig. 24< 7 > Assembling clutch section(1) Before mounting, take the following steps. See Fig. 24.1. Apply MAKITA grease N. No.2 to 3 pcs. of steel ball 5 and 3 pcs. of steel ball 4.2. For effective adhesion, clean the screw hole of spindle and torx counter head sunk screw M5x10 with petrol.Spindle Torx counter sunkhead screw M5x10Screw hole fortorx counter sunk headscrew M5x10Fig. 21Fig. 22 Fig. 23