Makita BFH120F Instruction Manual

Also see for BFH040: Technical information Instruction manual

Contents

Makita BFH120F Instruction Manual Manual pdf 2 page image

2ENGLISHSPECIFICATIONS• Due to our continuing programme of research and development, the specifications herein are subject to changewithout notice.• Note: Specifications may differ from country to country.GENERAL SAFETY RULESUSA015-1(FOR ALL BATTERY OPERATED TOOLS)WARNING:Read and understand all instructions.Failure to follow all instructions listed below,may result in electric shock, fire and/orserious personal injury.SAVE THESE INSTRUCTIONSWork Area1. Keep your work area clean and well lit. Clutteredbenches and dark areas invite accidents.2. Keep bystanders, children, and visitors awaywhile operating a power tool. Distractions cancause you to lose control.Electrical Safety3. A battery operated tool with integral batteries ora separate battery pack must be recharged onlywith the specified charger for the battery. Acharger that may be suitable for one type of batterymay create a risk of fire when used with another bat-tery.4. Use battery operated tool only with specificallydesignated battery pack. Use of any other batter-ies may create a risk of fire.Personal Safety5. Stay alert, watch what you are doing, and usecommon sense when operating a power tool. Donot use tool while tired or under the influence ofdrugs, alcohol, or medication. A moment of inat-tention while operating power tools may result inserious personal injury.6. Dress properly. Do not wear loose clothing orjewelry. Contain long hair. Keep your hair, cloth-ing, and gloves away from moving parts. Looseclothes, jewelry, or long hair can be caught in mov-ing parts.7. Avoid accidental starting. Carrying tools with yourfinger on the switch invites accidents.8. Remove adjusting keys or wrenches before turn-ing the tool on. A wrench or a key that is leftattached to a rotating part of the tool may result inpersonal injury.9. Do not overreach. Keep proper footing and bal-ance at all times. Proper footing and balanceenable better control of the tool in unexpected situa-tions.10. Use safety equipment. Always wear eye protec-tion. Dust mask, non-skid safety shoes, hard hat, orhearing protection must be used for appropriate con-ditions.Tool Use and Care11. Use clamps or other practical way to secure andsupport the workpiece to a stable platform. Hold-ing the work by hand or against your body is unsta-ble and may lead to loss of control.12. Do not force tool. Use the correct tool for yourapplication. The correct tool will do the job betterand safer at the rate for which it is designed.13. Do not use tool if switch does not turn it on oroff. A tool that cannot be controlled with the switch isdangerous and must be repaired.14. Disconnect battery pack from tool or place theswitch in the locked or off position before mak-ing any adjustments, changing accessories, orstoring the tool. Such preventive safety measuresreduce the risk of starting the tool accidentally.Model BFH040/BFH040F BFH090/BFH090F BFH120FFastening torque 0.8-4.5 N•m (7-40 in.•lbs) 3.4-9 N•m (30-80 in•lbs) 5-12 N•m (44-106 in•lbs)No load speed (RPM) 400/minDimensions 190 mm x 266 mm x 71 mm (7-15/32” x 10-15/32” x 2-13/16”)(with Battery Cartridge BH1220)Net weight 1.5 kg (3.3 lbs) (with Battery Cartridge BH1220)Rated voltage D.C. 12 VHazardous Location Rating Class I Division 2 Rated for max 50°C ambient