3ENGLISH (Original instructions)Explanation of general view1-1. Battery cartridge2-1. Battery cartridge3-1. Switch trigger4-1. Reversing switch lever5-1. Light5-2. LED indicator7-1. Angle head7-2. Adjusting ring7-3. Ring7-4. Scale7-5. Adjusting grip7-6. Hole for Adjusting grip7-7. Edge of Adjusting ring7-8. Compression spring8-1. Socket8-2. Hole8-3. Pin9-1. Screw bit9-2. Sleeve10-1. Limit mark11-1. Screwdriver11-2. Brush holder capSPECIFICATIONSModel BFL060F BFL080F BFL120F BFL081F BFL121F BFL200FHard joint 1.5 - 6 N·m 2 - 8 N·m 5 - 12 N·m 2 - 8 N·m 5 - 12 N·m 8 - 20 N·mFasteningtorque Soft joint 1.5 - 6 N·m 2 - 7.5 N·m 5 - 12 N·m 2 - 7.5 N·m 5 - 11.5 N·m 8 - 18 N·mSquare drive 9.5 mm 9.5 mm 9.5 mm 9.5 mm 9.5 mm 9.5 mmNo load speed (min -1) 450 450 250 700 410 220430 x 71 x 92 mm (With Battery Cartridge BH1220)430 x 65 x 74 mm(With Battery Cartridge BH9020A) 413 X 74 X 92 mm (With Battery Cartridge BH1220C)454 x 71 x 92 mm (With Battery Cartridge BH1233)Dimensions 454 x 65 x 74 mm(With Battery Cartridge BH9033A) 421 x 74 x 107 mm (With Battery Cartridge BH1233C)Net weight 1.5 kg 1.6 kgRated voltage D.C. 9.6 V D.C. 12 V• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003ENE033-1Intended useThe tool is intended for screw driving in wood, metal andplastic. ENG905-1NoiseThe typical A-weighted noise level determined accordingto EN60745:Sound pressure level (LpA) : 70 dB(A) or lessUncertainty (K) : 3 dB(A)The noise level under working may exceed 80 dB(A)Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745:Work mode: screwdriving without impactVibration emission (ah ) : 2.5 m/s 2 or lessUncertainty (K) : 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard testmethod and may be used for comparing one toolwith another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of thepower tool can differ from the declared emissionvalue depending on the ways in which the tool isused.• Be sure to identify safety measures to protect theoperator that are based on an estimation ofexposure in the actual conditions of use (takingaccount of all parts of the operating cycle such asthe times when the tool is switched off and when itis running idle in addition to the trigger time).ENH101-15For European countries onlyEC Declaration of ConformityWe Makita Corporation as the responsiblemanufacturer declare that the following Makitamachine(s):Designation of Machine:Cordless Angle ScrewdriverModel No./ Type:BFL060F,BFL080F,BFL081F,BFL120F,BFL121F,BFL200Fare of series production andConforms to the following European Directives:2006/42/ECAnd are manufactured in accordance with the followingstandards or standardised documents: