Makita BHP440 Instruction Manual
Also see for BHP440: Instruction manualInstruction manualInstruction manualInstruction manual
                  | |
58. Some material contains chemicals which may betoxic. Take caution to prevent dust inhalation andskin contact. Follow material supplier safety data.SAVE THESE INSTRUCTIONSWARNING:MISUSE or failure to follow the safety rules stated inthis instruction manual may cause serious personalinjury.IMPORTANT SAFETYINSTRUCTIONS FOR BATTERYCARTRIDGE1. Before using battery cartridge, read all instruc-tions and cautionary markings on (1) batterycharger, (2) battery, and (3) product using battery.2. Do not disassemble battery cartridge.3. If operating time has become excessively shorter,stop operating immediately. It may result in a riskof overheating, possible burns and even an explo-sion.4. If electrolyte gets into your eyes, rinse them outwith clear water and seek medical attention rightaway. It may result in loss of your eyesight.5. Do not short the battery cartridge:(1) Do not touch the terminals with any conduc-tive material.(2) Avoid storing battery cartridge in a containerwith other metal objects such as nails, coins,etc.(3) Do not expose battery cartridge to water orrain.A battery short can cause a large current flow,overheating, possible burns and even a break-down.6. Do not store the tool and battery cartridge in loca-tions where the temperature may reach or exceed50°C (122°F).7. Do not incinerate the battery cartridge even if it isseverely damaged or is completely worn out. Thebattery cartridge can explode in a fire.8. Be careful not to drop or strike battery.SAVE THESE INSTRUCTIONSTips for maintaining maximum battery life1. Charge the battery cartridge before completelydischarged. Always stop tool operation andcharge the battery cartridge when you notice lesstool power.2. Never recharge a fully charged battery cartridge.Overcharging shortens the battery service life.3. Charge the battery cartridge with room tempera-ture at 10°C - 40°C (50°F - 104°F). Let a hot batterycartridge cool down before charging it.FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off and the bat-tery cartridge is removed before adjusting or checkingfunction on the tool.Installing or removing battery cartridge(Fig. 1)• Always switch off the tool before insertion or removal ofthe battery cartridge.• To remove the battery cartridge, withdraw it from thetool while sliding the button on the side of the cartridge.• To insert the battery cartridge, align the tongue on thebattery cartridge with the groove in the housing and slipit into place. Always insert it all the way until it locks inplace with a little click. If you can see the red part onthe upper side of the button, it is not locked completely.Insert it fully until the red part cannot be seen. If not, itmay accidentally fall out of the tool, causing injury toyou or someone around you.• Do not use force when inserting the battery cartridge. Ifthe cartridge does not slide in easily, it is not beinginserted correctly.Switch action (Fig. 2)CAUTION:• Before inserting the battery cartridge into the tool,always check to see that the switch trigger actuatesproperly and returns to the “OFF” position whenreleased.To start the tool, simply pull the switch trigger. Tool speedis increased by increasing pressure on the switch trigger.Release the switch trigger to stop.Lighting up the front lamp (Fig. 3)CAUTION:• Do not look in the light or see the source of lightdirectly.Pull the switch trigger to light up the lamp. The lampkeeps on lighting while the switch trigger is being pulled.The lamp goes out 10 -15 seconds after releasing the trig-ger.NOTE:• Use a dry cloth to wipe the dirt off the lens of lamp. Becareful not to scratch the lens of lamp, or it may lowerthe illumination.Reversing switch action (Fig. 4)This tool has a reversing switch to change the direction ofrotation. Depress the reversing switch lever from the Aside for clockwise rotation or from the B side for counter-clockwise rotation.When the reversing switch lever is in the neutral position,the switch trigger cannot be pulled. |
Related manuals for Makita BHP440
Makita BHP440 Instruction Manual
Makita BHP440 Instruction Manual
Makita BHP440 Instruction Manual
Makita BHP440 Instruction Manual
Makita BHP441 Instruction Manual
Makita BHP441 Instruction Manual
Makita BHP441 Instruction Manual
Makita BHP441 Instruction Manual
Makita BHP441 Instruction Manual
Makita BHP441 Instruction Manual
manualsdatabase
Your AI-powered manual search engine