4ENGLISH (Original instructions)Explanation of general viewSPECIFICATIONS• Due to our continuing program of research and development, the specifications herein are subject to change withoutnotice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003Symbols END004-4The following show the symbols used for the equipment.Be sure that you understand their meaning before use.... Read instruction manual......... Only for EU countriesDo not dispose of electric equipment orbattery pack together with householdwaste material!In observance of European Directive2002/96/EC on waste electric andelectronic equipment, 2006/66/EC onbatteries and accumulators and wastebatteries and accumulators and theirimplementation in accordance withnational laws, electric equipment andbattery pack that have reached the endof their life must be collected separatelyand returned to an environmentallycompatible recycling facility.Intended use ENE039-1The tool is intended for impact drilling in brick, concreteand stone as well as for drilling without impact in wood,metal, ceramic and plastic.General Power Tool SafetyWarnings GEA010-1WARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings andinstructions for future reference.CORDLESS PERCUSSIONDRIVER DRILL SAFETYWARNINGS GEB056-21. Wear ear protectors when impact drilling.Exposure to noise can cause hearing loss.2. Use auxiliary handle(s), if supplied with the tool.Loss of control can cause personal injury.3. Hold power tool by insulated gripping surfaces,when performing an operation where the cutting1. Battery cartridge2. Button3. Red part4. Switch trigger5. Lamp6. Reversing switch lever7. Speed change lever8. Adjusting ring9. Action mode changing ring10. Arrow11. Graduations12. Sleeve13. Screw14. Hook15. Groove16. Blow-out bulb17. Limit mark18. Rear cover19. Screws20. Spring21. Arm22. Recesed part23. Carbon brush cap24. HoleModel BHP440 BHP450CapacitiesConcrete 13 mmSteel 13 mmWood 27 mmWood screw ø 6.8 mm x 50 mmMachine screw M6No load speed (min -1 ) High (2) 0 - 1,400Low (1) 0 - 400Blows per minute (min -1 ) High (2) 0 - 21,000Low (1) 0 - 6,000Overall length 204 mmNet weight 1.7 kg 1.8 kgRated voltage D.C. 14.4 V D.C. 18 VCdNi-MHLi-ion