2ENGLISH (Original instructions)SPECIFICATIONSModel BHP441 BHP451Concrete 14 mm 16 mmSteel 13 mm 13 mmWood 50 mm 65 mmWood screw 6 mm x 75 mm 10 mm x 89 mmCapacitiesMachine screw 6 mmHigh (3) 0- 1,700Medium (2) 0 - 600No load speed (min -1)Low (1) 0 - 300High (3) 0 - 25,500Medium (2) 0 - 9,000Blows per minute (min -1)Low (1) 0 - 4,500Overall length 250 mm 250 mmNet weight 2.4 kg 2.5 kgRated voltage D.C. 14.4 V D.C. 18 V• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003END004-4SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.읭 Read instruction manual.읭 Only for EU countriesDo not dispose of electric equipment orbattery pack together with householdwaste material!In observance of European Directive2002/96/EC on waste electric andelectronic equipment, 2006/66/EC onbatteries and accumulators and wastebatteries and accumulators and theirimplementation in accordance withnational laws, electric equipment andbattery pack that have reached the endof their life must be collected separatelyand returned to an environmentallycompatible recycling facility. ENE039-1Intended useThe tool is intended for impact drilling in brick, concreteand stone as well as for drilling without impact in wood,metal, ceramic and plastic.GEA006-2General Power Tool SafetyWarningsWARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings andinstructions for future reference.The term "power tool" in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Work area safety1. Keep work area clean and well lit. Cluttered ordark areas invite accidents.2. Do not operate power tools in explosiveatmospheres, such as in the presence offlammable liquids, gases or dust. Power toolscreate sparks which may ignite the dust or fumes.3. Keep children and bystanders away whileoperating a power tool. Distractions can causeyou to lose control.Electrical safety4. Power tool plugs must match the outlet. Nevermodify the plug in any way. Do not use anyadapter plugs with earthed (grounded) powertools. Unmodified plugs and matching outlets willreduce risk of electric shock.CdNi-MHLi-ion