Makita BHR202 Instruction Manual

Also see for BHR202: Parts Breakdown Specifications Instruction manual Instruction manual Instruction manual

Contents

6• When not operating the tool, always set thereversing switch lever to the neutral position.Selecting the action modeRotation with hammering123007575For drilling in concrete, masonry, etc., depress the lockbutton and rotate the action mode changing knob to thesymbol. Use a tungsten-carbide tipped bit.Rotation only1007576For drilling in wood, metal or plastic materials, depressthe lock button and rotate the action mode changingknob to the symbol. Use a twist drill bit or wood bit.Hammering only1007577For chipping, scaling or demolition operations, depressthe lock button and rotate the action mode changingknob to the symbol. Use a bull point, cold chisel,scaling chisel, etc.CAUTION:• Do not rotate the action mode changing knob whenthe tool is running. The tool will be damaged.• To avoid rapid wear on the mode changemechanism, be sure that the action modechanging knob is always positively located in oneof the three action mode positions.Torque limiterThe torque limiter will actuate when a certain torquelevel is reached. The motor will disengage from theoutput shaft. When this happens, the bit will stop turning.CAUTION:• As soon as the torque limiter actuates, switch offthe tool immediately. This will help preventpremature wear of the tool.• Hole saws cannot be used with this tool. They tendto pinch or catch easily in the hole. This will causethe torque limiter to actuate too frequently.ASSEMBLYCAUTION:• Always be sure that the tool is switched off and thebattery cartridge is removed before carrying outany work on the tool.Side grip (auxiliary handle)12345 6008830CAUTION:• Always use the side grip to ensure operatingsafety.Install the side grip so that the teeth on the grip fit inbetween the protrusions on the tool barrel. Then tightenthe grip by turning clockwise at the desired position. Itmay be swung 360° so as to be secured at any position.Bit greaseCoat the bit shank head beforehand with a smallamount of bit grease (about 0.5 -1 g; 0.02 - 0.04 oz.).This chuck lubrication assures smooth action andlonger service life.1. Grip base2. Teeth3. Side grip4. Protrusion5. Loosen6. Tighten1. Hammering only1. Rotation only1. Rotation withhammering2. Lock button3. Action modechanging knob