Makita BHR261 Instruction Manual

Also see for BHR261: Instruction manual Instruction manual Instruction manual Instruction manual Technical information

Contents

Makita BHR261 Instruction Manual Manual pdf 4 page image

4ENGLISHExplanation of general view1-1. Red part1-2. Button1-3. Battery cartridge2-1. Switch trigger3-1. Lamp4-1. Reversing switch lever5-1. Quick change chuck for SDS-plus5-2. Change cover5-3. Change cover line6-1. Quick change drill chuck6-2. Spindle6-3. Change cover line6-4. Change cover7-1. Rotation with hammering8-1. Rotation only9-1. Hammering only10-1. Grip base10-2. Teeth10-3. Loosen10-4. Tighten10-5. Side grip10-6. Protrusion11-1. Bit shank11-2. Bit grease12-1. Bit12-2. Chuck cover13-1. Bit13-2. Chuck cover14-1. O symbol14-2. Action mode changing knob16-1. Depth gauge17-1. Dust cup19-1. Blow-out bulb21-1. Chuck adapter21-2. Keyless drill chuck22-1. Sleeve22-2. Ring23-1. Change cover line23-2. Quick change chuck for SDS-plus23-3. Change cover24-1. Spindle24-2. Quick change drill chuck24-3. Change cover line24-4. Change cover25-1. Sleeve25-2. Ring25-3. Quick change drill chuck26-1. Limit mark27-1. Brush holder cap27-2. ScrewdriverSPECIFICATIONSModel BHR261 BHR261TConcrete 26 mmSteel 13 mmCapacitiesWood 32 mmNo load speed (min -1) 0 - 1,200Blows per minute 0 - 4,800Overall length 363 mm 387 mmNet weight 4.5 kg 4.8 kgRated voltage D.C. 36 V• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.• Note: Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003ENE043-1Intended useThe tool is intended for hammer drilling and drilling inbrick, concrete and stone as well as for chiselling work.It is also suitable for drilling without impact in wood,metal, ceramic and plastic.For Model BHR261 ENG102-1For European countries onlyNoiseThe typical A-weighted noise level determined accordingto EN60745-2-6:Sound pressure level (LpA) : 91 dB(A)Sound power level (LWA) : 102 dB(A)Uncertainty (K) : 3 dB(A)Wear ear protectionENG201-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745-2-1:Work mode: Drilling into metalVibration emission (ah,D) : 3.0 m/s 2Uncertainty (K) : 1.5 m/s 2ENG215-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745-2-6:Work mode : chiseling functionVibration emission (ah,CHeq ) : 11.0 m/s 2Uncertainty (K) : 1.5 m/s 2ENG217-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745-2-6:Work mode : hammer drilling into concrete, 16 mmdiameter and 100 mm depthVibration emission (ah,HD) : 13.5 m/s 2Uncertainty (K) : 1.5 m/s 2