Makita BHS630 Instruction Manual

Also see for BHS630: Instruction manual Technical information Instruction manual Instruction manual Instruction manual

Contents

Makita BHS630 Instruction Manual Manual pdf 11 page image

111 2012103This adjustment has been made at the factory. But if it isoff, adjust the adjusting screw with a hex wrench whileinspecting 90°the blade with the base using a triangularrule or square rule, etc.Adjusting for parallelismAB12 3012101The parallelism between the blade and the base hasbeen factory adjusted. But if it is off, you can adjust it asthe following procedure.Make sure all levers and screws are tightened. Slightlyloosen the screw as illustrated. While opening the lowerguard, move the rear of base so that the distance A andB are equal. After adjusting, tighten the screw. Make atest cut to get a correct parallelism.Replacing carbon brushes1001145Remove and check the carbon brushes regularly.Replace when they wear down to the limit mark. Keepthe carbon brushes clean and free to slip in the holders.Both carbon brushes should be replaced at the sametime. Use only identical carbon brushes.1 2012114Use a screwdriver to remove the brush holder caps.Take out the worn carbon brushes, insert the new onesand secure the brush holder caps.To maintain product SAFETY and RELIABILITY, repairs,any other maintenance or adjustment should beperformed by Makita Authorized Service Centers,always using Makita replacement parts.OPTIONAL ACCESSORIESCAUTION:• These accessories or attachments arerecommended for use with your Makita toolspecified in this manual. The use of any otheraccessories or attachments might present a risk ofinjury to persons. Only use accessory orattachment for its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Saw blades• Rip fence (Guide rule)• Hex wrench 5• Dust nozzle• Guide rail adapter• Guide rail• Various type of Makita genuine batteries andchargersNOTE:• Some items in the list may be included in the toolpackage as standard accessories. They may differfrom country to country.1. Brush holdercap2. Screwdriver1. Limit mark1. Base2. Screw3. Saw blade1. Triangular rule2. Saw blade

/ 12

Related manuals for Makita BHS630