Makita BJS160 Instruction Manual

Also see for BJS100: Instruction manual Instruction manual Instruction manual Instruction manual Technical information

Contents

Makita BJS160 Instruction Manual Manual pdf 2 page image

2ENGLISH (Original instructions)SPECIFICATIONSModel BJS160 BJS161 BJS100 BJS101Steel up to 400 N/mm 2 1.6 mm (16 ga) 1.0 mm (20 ga)Steel up to 600 N/mm 2 1.2 mm (18 ga) 0.7 mm (23 ga)Max. cutting capacitiesAluminum up to 200 N/mm 2 2.5 mm (13 ga) 2.5 mm (12 ga)Min. cutting radius 250 mm 30 mmStrokes per minute (min -1) 4,300 4,300Overall length 362 mm 364 mmNet weight 1.9 kg 2.0 kg 1.9 kg 2.0 kgRated voltage D.C. 14.4 V D.C. 18 V D.C. 14.4 V D.C. 18 V• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003END004-6SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.･ Read instruction manual.･ Only for EU countriesDo not dispose of electric equipment orbattery pack together with householdwaste material!In observance of the EuropeanDirectives, on Waste Electric andElectronic Equipment and Batteries andAccumulators and Waste Batteries andAccumulators and their implementationin accordance with national laws,electric equipment and batteries andbattery pack(s) that have reached theend of their life must be collectedseparately and returned to anenvironmentally compatible recyclingfacility. ENE037-1Intended useThe tool is intended for cutting sheet steel and stainlesssheet steel. ENG905-1NoiseThe typical A-weighted noise level determined accordingto EN60745:Model BJS100, BJS101, BJS161Sound pressure level (LpA) : 71 dB (A)Uncertainty (K) : 3 dB (A)The noise level under working may exceed 80 dB (A).Model BJS160Sound pressure level (LpA) : 74 dB (A)Uncertainty (K) : 3 dB (A)The noise level under working may exceed 80 dB (A).Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum) determinedaccording to EN60745:Model BJS100Work mode : cutting sheet metalVibration emission (ah ) : 12.5 m/s 2Uncertainty (K) : 1.5 m/s 2Model BJS101, BJS161Work mode : cutting sheet metalVibration emission (ah ) : 13.0 m/s 2Uncertainty (K) : 1.5 m/s 2Model BJS160Work mode : cutting sheet metalVibration emission (ah ) : 12.0 m/s 2Uncertainty (K) : 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard test methodand may be used for comparing one tool with another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of the powertool can differ from the declared emission valueCdNi-MHLi-ion