Makita BTP130 Instruction Manual

Also see for BTP130: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

11OPTIONAL ACCESSORIESCAUTION:• These accessories or attachments are recommendedfor use with your Makita tool specified in this manual.The use of any other accessories or attachments mightpresent a risk of injury to persons. Only use accessoryor attachment for its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Screw bits• Hook• Plastic carrying case• Various type of Makita genuine batteries and chargers• Stopper (for impact driving)• Bit piece• Hybrid drill chuckNOTE:• Some items in the list may be included in the tool pack-age as standard accessories. They may differ fromcountry to country.ENG905-1NoiseThe typical A-weighted noise level determined accordingto EN60745:Model BTP130Sound pressure level (L pA): 87 dB (A)Sound power level (LWA): 98 dB (A)Uncertainty (K): 3 dB (A)Model BTP140Sound pressure level (L pA): 89 dB (A)Sound power level (LWA): 100 dB (A)Uncertainty (K): 3 dB (A)Wear ear protection ENG900-1VibrationThe vibration total value (tri-axial vector sum) determinedaccording to EN60745:Model BTP130Work mode: impact drilling into concreteVibration emission (ah , ID ): 11.5 m/s 2Uncertainty (K): 2.5 m/s 2Work mode: impact tightening of fasteners of themaximum capacity of the toolVibration emission (ah ): 5.5 m/s 2Uncertainty (K): 1.5 m/s 2Work mode: drilling into metalVibration emission ( ah, D): 2.5 m/s 2 or lessUncertainty (K): 1.5 m/s 2Model BTP140Work mode: impact drilling into concreteVibration emission (ah , ID ): 9.0 m/s 2Uncertainty (K): 1.5 m/s 2Work mode: impact tightening of fasteners of themaximum capacity of the toolVibration emission (ah ): 10.0 m/s2Uncertainty (K): 1.5 m/s 2Work mode: drilling into metalVibration emission ( ah, D): 2.5 m/s 2 or lessUncertainty (K): 1.5 m/s 2ENG901-1• The declared vibration emission value has been mea-sured in accordance with the standard test method andmay be used for comparing one tool with another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of the powertool can differ from the declared emission valuedepending on the ways in which the tool is used.• Be sure to identify safety measures to protect the oper-ator that are based on an estimation of exposure in theactual conditions of use (taking account of all parts ofthe operating cycle such as the times when the tool isswitched off and when it is running idle in addition tothe trigger time). ENH101-15For European countries onlyEC Declaration of ConformityWe Makita Corporation as the responsiblemanufacturer declare that the following Makitamachine(s):Designation of Machine:Cordless 4 Mode Impact DriverModel No./ Type: BTP130, BTP140are of series production andConforms to the following European Directives:2006/42/ECAnd are manufactured in accordance with the followingstandards or standardised documents:EN60745The technical documentation is kept by our authorisedrepresentative in Europe who is:Makita International Europe Ltd.Michigan Drive, Tongwell,Milton Keynes, Bucks MK15 8JD, England30.1.2009Tomoyasu KatoDirectorMakita Corporation3-11-8, Sumiyoshi-cho,Anjo, Aichi, 446-8502, JAPAN

/ 68

Related manuals for Makita BTP130

Makita BTP130 Instruction Manual

Makita BTP131 Instruction Manual

This manual is suitable for:

BTP130 BTP140

manualsdatabase

Your AI-powered manual search engine