Makita BUC121 Instruction Manual

Also see for BUC121: Technical information Instruction manual Instruction manual Instruction manual Instruction manual

Contents

6Vibration emission (ah ) : 4.2 m/s 2Uncertainty (K) : 1.5 m/s 2For Model BUC122 ENG101-2For European countries onlyNoiseThe typical A-weighted noise level determined accordingto EN60745-2-13:Sound pressure level (LpA) : 84.6 dB(A)Uncertainty (K) : 2 dB(A)The noise level under working may exceed 85 dB (A).Wear ear protection. ENG221-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745-2-13:Work mode : cutting woodVibration emission (ah ) : 4.3 m/s 2Uncertainty (K) : 1.5 m/s 2ENH016-5EC-DECLARATION OF CONFORMITYThe undersigned, Kato, as authorized by, declare thatthe MAKITA machines,EU model identification No.:M6 08 02 24243 083BUC121complies with the standard safety and healthrequirements of the pertinent EU guidelines:EU machinery guideline 98/37/EC, Noise emission2000/14/EG, EU EMC guideline.The requirements of the above EU guidelines wereimplemented chiefly on the basis of the followingstandards: EN60745-2-13, EN 55014, ENISO11681.The conformity assessment procedure 2000/14/EG wasperformed per Annex V. The measured sound powerlevel (Lwa) is 92.0 dB(A). The guaranteed sound powerlevel (Ld) is 94 dB(A). The EU Type-Examination per98/37/EG was performed by: TÜV Product ServiceGmbH, Zertifizierungsstelle, Ridlerstraße 31, D-80339München.Tomoyasu Kato CE2007000230DirectorResponsible Manufacturer:Makita Corporation3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPANAuthorized Representative in Europe:Makita International Europe Ltd.Michigan Drive, Tongwell, Milton Keynes, Bucks MK158JD, ENGLANDENH016-5EC-DECLARATION OF CONFORMITYThe undersigned, Kato, as authorized by, declare thatthe MAKITA machines,EU model identification No.:M6 08 02 24243 083BUC122complies with the standard safety and healthrequirements of the pertinent EU guidelines:EU machinery guideline 98/37/EC, Noise emission2000/14/EG, EU EMC guideline.The requirements of the above EU guidelines wereimplemented chiefly on the basis of the followingstandards: EN60745-2-13, EN 55014, ENISO11681.The conformity assessment procedure 2000/14/EG wasperformed per Annex V. The measured sound powerlevel (Lwa) is 92.7 dB(A). The guaranteed sound powerlevel (Ld) is 95 dB(A). The EU Type-Examination per98/37/EG was performed by: TÜV Product ServiceGmbH, Zertifizierungsstelle, Ridlerstraße 31, D-80339München.Tomoyasu Kato CE2007000230DirectorResponsible Manufacturer:Makita Corporation3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPANAuthorized Representative in Europe:Makita International Europe Ltd.Michigan Drive, Tongwell, Milton Keynes, Bucks MK158JD, ENGLAND GEB037-1Chain saw safety warnings:DO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto chain saw safety rules. If you use this toolunsafely or incorrectly, you can suffer seriouspersonal injury.1. Keep all parts of the body away from the sawchain when the chain saw is operating. Beforeyou start the chain saw, make sure the sawchain is not contacting anything. A moment ofinattention while operating chain saws may causeentanglement of your clothing or body with thesaw chain.2. Always hold the chain saw with your righthand on the rear handle and your left hand onthe front handle. Holding the chain saw with areversed hand configuration increases the risk ofpersonal injury and should never be done.3. Wear safety glasses and hearing protection.Further protective equipment for head, hands,legs and feet is recommended. Adequateprotective clothing will reduce personal injury byflying debris or accidental contact with the sawchain.