Makita BUM166 Instruction Manual

Also see for BUM166: Instruction manual Instruction manual Instruction manual User manual

Contents

Makita BUM166 Instruction Manual Manual pdf 17 page image

17Installing or removing chip receiver(optional accessory)CAUTION:• Always be sure that the tool is switched off and thebattery cartridge is removed before installing orremoving chip receiver.NOTE:• When replacing the chip receiver, always weargloves so that hands and face does not directlycontact the blade. Failure to do so may causepersonal injury.• When replacing the chip receiver, always be carefulnot to contact the shear blades.• The chip receiver receives cut-off leaves andalleviates collecting thrown-away leaves. This canbe installed on either side of the tool.123 4012547Place the chip receiver on the shear blades so that itsslits overlap with the screws on the shear blades andsecure it using two clamping nuts.To remove the chip receiver, loosen and remove the twoclamping nuts and then take it out.Storage1012566The hook hole in the tool bottom is convenient forhanging the tool from a nail or screw on the wall.Put the blade cover on the shear blades so that theblades are not exposed. Store the tool out of the reach ofchildren carefully.Store the tool in the place not exposed to water and rain.1. Hook hole1. Clamping nuts2. Chip receiver3. Screws on theshear blades4. Blade cover tobe alwaysinstalled beforeinstalling thechip receiver

/ 20

Related manuals for Makita BUM166