Makita BUX360 Instruction Manual

Also see for BUX360: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Makita BUX360 Instruction Manual Manual pdf 6 page image

6FUNCTIONAL DESCRIPTIONWARNING:• Always be sure that the tool is switched off andthe battery cartridge is removed beforeadjusting or checking functions on the tool.Failure to switch off and remove the batterycartridge may result in serious personal injury fromaccidental start-up.Installing or removing battery cartridgeCAUTION:• Hold the tool and the battery cartridge firmlywhen installing or removing battery cartridge.Failure to hold the tool and the battery cartridgefirmly may cause them to slip off your hands andresult in damage to the tool and battery cartridgeand a personal injury.• Always switch off the tool before installing orremoving of the battery cartridge.1 23012942To remove the battery cartridge, slide it from the toolwhile sliding the button on the front of the cartridge.To install the battery cartridge, align the tongue on thebattery cartridge with the groove in the housing and slip itinto place. Always insert it all the way until it locks inplace with a little click. If you can see the red indicator onthe upper side of the button, it is not locked completely.Install it fully until the red indicator cannot be seen. If not,it may accidentally fall out of the tool, causing injury toyou or someone around you.NOTE:• Do not use force when installing the batterycartridge. If the cartridge does not slide in easily, itis not being inserted correctly.Power switch actionWARNING:• Before inserting the battery cartridge in thetool, always check to see that the switch triggeractuates properly and returns to the "OFF"position when released. Do not pull the switchtrigger hard without pressing in the lock-offbutton. This can cause switch breakage.Operating a tool with a switch that does not actuateproperly can lead to loss of control and seriouspersonal injury.12010814To prevent the switch trigger from being accidentallypulled, a lock-off button is provided.To start the tool, press in the lock-off button and pull theswitch trigger. The tool speed is increased by increasingpressure on the switch trigger. Release the switch triggerto stop.Reversing Switch for Debris Removal1AB010825This tool has a reversing switch. To remove debrisjammed or entangled in the tool, depress the "B" side ofthe switch to reverse the rotation. For normal operation,depress the "A" side of the switch.NOTICE:• Always check the direction of rotation beforeoperation.• Use the reversing switch only after the tool comesto a complete stop. Changing the direction ofrotation before the tool stops may damage it.Speed change112010815Two speed ranges can be preselected with the speedchange switch.1. Speed changeswitch lever1. Reversing switch2. A positiondepressed fornormal operation3. B positiondepressed forweed and debrisremoval1. Lock-off button2. Switch trigger1. Red indicator2. Button3. Battery cartridge