Makita CP100D Instruction Manual

Also see for CP100D: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

4 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: CP100DNo load speed 300 min -1Overall length 291 mmRated voltage D.C. 10.8 V - 12 V maxStandard battery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041BCharger DC10SA / DC10SB / DC10WC / DC10WDNet weight 0.72 - 0.88 kg• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications and battery cartridge may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combination, according to EPTA-Procedure 01/2014, are shown in the table.Intended useThe tool is intended for cutting flexible, soft materials upto 6 mm in thickness, such as carpet, cardboard, andsimilar materials. The tool is also intended for cuttingCD, DVD, and Blu-ray Disc.NoiseThe typical A-weighted noise level determined accord-ing to EN62841:Sound pressure level (LpA) : 70 dB(A) or lessUncertainty (K) : 3 dB(A)The noise level under working may exceed 80 dB (A).WARNING: Wear ear protection.VibrationThe vibration total value (tri-axial vector sum) deter-mined according to EN62841:Work mode: Cutting cardboardVibration emission (ah) : 2.5 m/s2 or lessUncertainty (K) : 1.5 m/s2NOTE: The declared vibration emission value hasbeen measured in accordance with the standard testmethod and may be used for comparing one tool withanother.NOTE: The declared vibration emission valuemay also be used in a preliminary assessment ofexposure.WARNING: The vibration emission during actualuse of the power tool can differ from the declaredemission value depending on the ways in which thetool is used.WARNING: Be sure to identify safety measuresto protect the operator that are based on an estima-tion of exposure in the actual conditions of use (takingaccount of all parts of the operating cycle such asthe times when the tool is switched off and when it isrunning idle in addition to the trigger time).EC Declaration of ConformityFor European countries onlyThe EC declaration of conformity is included as Annex Ato this instruction manual.SAFETY WARNINGSGeneral power tool safety warningsWARNING: Read all safety warnings, instruc-tions, illustrations and specifications provided with thispower tool. Failure to follow all instructions listed belowmay result in electric shock, fire and/or serious injury.Save all warnings and instruc-tions for future reference.The term "power tool" in the warnings refers to your mains-oper-ated (corded) power tool or battery-operated (cordless) power tool.Cordless multi cutter safetywarnings1. Hold the power tool by insulated gripping surfaces,when performing an operation where the blade maycontact hidden wiring. Blade contacting a "live" wiremay make exposed metal parts of the power tool "live"and could give the operator an electric shock.2. Hold the tool firmly.3. Do not touch the blade or bring the tool nearthe hand or face.SAVE THESE INSTRUCTIONS.WARNING: DO NOT let comfort or familiaritywith product (gained from repeated use) replace strictadherence to safety rules for the subject product.MISUSE or failure to follow the safety rules stated in thisinstruction manual may cause serious personal injury.