Makita CXTJV102DZ Instruction Manual

13 ENGLISHGuide rail adapter setOptional accessoryWhen cutting parallel and uniform width or cutting straight,the use of the guide rail and the guide rail adapter will assurethe production of fast and clean cuts. To install the guide railadapter, insert the rule bar into the square hole of the baseas far as it goes. Secure the bolt with the hex wrench securely.► Fig.29: 1. Hex wrench 2. Rule barInsert the rule bar into the square hole of the guide railadapter, and secure the screw firmly. Place the guiderail adapter on the guide rail.► Fig.30: 1. Guide rail adapter 2. Guide rail 3. ScrewNOTICE: Always use blades No. B-8, B-13, B-16,B-17 or 58 when using the guide rail and the guiderail adapter.MAINTENANCECAUTION: Always be sure that the tool isswitched off and the battery cartridge is removedbefore attempting to perform inspection ormaintenance.NOTICE: Never use gasoline, benzine, thinner,alcohol or the like. Discoloration, deformation orcracks may result.To maintain product SAFETY and RELIABILITY,repairs, any other maintenance or adjustment shouldbe performed by Makita Authorized or Factory ServiceCenters, always using Makita replacement parts.OPTIONAL ACCESSORIESCAUTION: These accessories or attachmentsare recommended for use with your Makita toolspecified in this manual. The use of any otheraccessories or attachments might present a risk ofinjury to persons. Only use accessory or attachmentfor its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Jig saw blades• Hex wrench 3• Rip fence (guide rule) set• Guide rail adapter set• Anti-splintering device• Hose (For vacuum cleaner)• Cover plate• Dust nozzle• Dust cover• Makita genuine battery and chargerNOTE: Some items in the list may be included in thetool package as standard accessories. They maydiffer from country to country.