Makita DBN500 Instruction Manual

Also see for DBN500: Instruction manual Instruction manual Instruction manual Technical information Instruction manual

Contents

Makita DBN500 Instruction Manual Manual pdf 2 page image

2ENGLISH (Original instructions)SPECIFICATIONSModel DBN500Brad nail size 18 Ga x 15, 20, 25, 30, 32, 35, 38, 40, 45, 50 mmBrad nail magazine capacity 100 pcsDimensions (L x W x H) 294 mm x 97 mm x 318 mmRated voltage D.C. 18 VNet weight 3.3 kg 3.5 kgStandard battery cartridges BL1815 / BL1815N /BL1820 / BL1820BBL1830 / BL1840 / BL1840B /BL1850 / BL1850B• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003END311-1SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.･ Read instruction manual.･ Wear safety glasses.･ Do not use on scaffoldings, ladders.･ Keep fingers away from trigger whennot driving fasteners to avoid accidentalfiring.･ Only for EU countriesDo not dispose of electric equipment orbattery pack together with householdwaste material!In observance of the EuropeanDirectives, on Waste Electric andElectronic Equipment and Batteries andAccumulators and Waste Batteries andAccumulators and their implementationin accordance with national laws,electric equipment and batteries andbattery pack(s) that have reached theend of their life must be collectedseparately and returned to anenvironmentally compatible recyclingfacility. ENE073-1Intended useThe tool is intended for fastening on interior work andfurniture work.ENG905-1NoiseThe typical A-weighted noise level determinedaccording to EN60745:Sound pressure level (LpA) : 79 dB (A)Uncertainty (K) : 3 dB (A)The noise level under working may exceed 80 dB (A).Wear ear protectionENG904-2VibrationThe vibration total value determined according toEN60745:Vibration emission (ah ) : 2.5 m/s 2 or lessUncertainty (K) : 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard testmethod and may be used for comparing one toolwith another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of thepower tool can differ from the declared emissionvalue depending on the ways in which the tool isused.• Be sure to identify safety measures to protect theoperator that are based on an estimation ofexposure in the actual conditions of use (takingaccount of all parts of the operating cycle such asthe times when the tool is switched off and when itis running idle in addition to the trigger time).CdNi-MHLi-ion