Makita DCS3500 Repair Manual

Also see for DCS3500: Instruction manual Repair manual

Contents

___Reparaturanleitung PS-4600 / PS-5000 19Repair manual DCS3500 / DCS3501 / DCS4300 / DCS4301 / EA3500F / EA3501F / EA4300F / EA4301F / MEA3500L / MEA3500M / MEA4300G / MEA4300LRemoving the carburetor bottomRemove throttle linkage 4.Remove cover (see chapter 07).Pull short.circuit wire 5 from the ignitionarmature.Unscrew screw 6 and remove along with thecontact spring 7.Unscrew screw 8.Detach pulse line 9.The carburetor base can now be removedalong with the combination switch.Note: When assembling, make sure that theshort-circuit switch is pulled through therubber grommet as far towards the carburetoras possible, in order to prevent the wire fromtouching the cylinder.Note: Do not twist the fuel line duringassembly.Note: If replacing the foam 10 in thecarburetor base, make sure the position iscorrect. The opening should be towards thesuction channel, as shown in the illustration.5 9810674123408 CARBURETORRemoving the intake manifold andcarburetorCAUTION: Completely empty the fuel tankbefore disassembling the carburetor!Remove cover and air filter.Move combination switch to safety position.Unscrew 4 screws 1.Remove intake manifold 2.Pull fuel lines and pulse line 3 from thecarburetor.CAUTION: There is fuel in the line. Catchescaping fuel with a cloth.Disengage throttle link 4.Note: When reassembling, engage thelinkage in the marked hole (arrow).