Makita DCS4630 Instruction Manual

Also see for DCS4630: Instruction manual

261514BCleaning the cylinder areaAfter prolonged use, dirt and sawdust can build up on the cylin-der and cause the engine to overheat. The cylinder fin cleanerhelps remove deposits between the cylinder fins and betweenthe cylinder and the mounting plate.Remove cover.Remove the fan housing.CAUTION: To prevent eye injury, always wear eye protectionwhen cleaning the filter with compressed air!The entire area (14) can now be brushed clean or cleaned withcompressed air.With the cyinder fin cleaner, clean out the area between thecylinder fins and between the cylinder and the mounting pla-te.Do not use force. Be careful not to damage the short-circuitwire and the ignition wire.CReplacing the suction headThe felt filter (15) of the suction head can become clogged.It is recommended to replace the suction head once everythree months in order to ensure unimpeded fuel flow to thecarburetor.To remove the suction head for replacement, pull it out throughthe tank filler neck using a piece of wire bent at one end toform a hook.